Home Blog Page 85

YETI Introduces Wheeled Roadie 45 and 60 Hard-Sided Coolers

YETI is making everyone’s lives easier this summer as they release two new wheeled Roadie coolers perfect for rolling down the dock on your way to the skiff or down the boat ramp to your drift boat. Check them out below!

From YETI Coolers:

Wheeled Roadie 48

The Roadie® 48 Wheeled Cooler is maneuverable, durable, and ready for the long trek ahead. Built for navigating tailgate crowds and taking lunch to go, this wheeled cooler has the same cold-holding power you’d expect from a Tundra® Cooler with added mobility. It’s also going to last just as long thanks to its RockSolid™ Strength from the handle to its thick walls, this thing is virtually indestructible.

Key Features

  • Periscopeâ„¢handle: this retractable, dolly-style handle pops up when you need it and hides away when space-saving is key.
  • Neverflatâ„¢wheels: solid, single-piece tire construction is impact-and puncture-resistant
  • Lipgripâ„¢handles: these streamlined handles stay out of the way to make carrying your catch (or cold ones) less of a chore.
  • Bearfootâ„¢non-slip feet: budge-resistant padding prevents rogue sliding on the boat or in the backseat.
  • Anchorpointâ„¢tie-down slots: the built-in molded tie-down slots promise easy mounting to your boat, trailer, or truck bed.
  • Bestdamâ„¢drain plug: This leakproof barrier offers quick-drain convenience.•Wine-friendly packing: Internal height is 13” –so (most) standard wine bottles, growlers, and two-liter bottles fit upright.

Accessories:

  • Clear Tritan Basket keeps provisions dry, in place, and protected
  • A divider separates and organizes internal space and doubles as a cutting board (sold separately)
  • Cupholder keeps drinks within reach without compromising cooler access (sold separately)
  • External dimensions: 19.83″ X 19.95″ X 20.50″
  • Empty weight: 25.7 lbs
  • Capacity: 41 cans using a 2:1 ice-to-can ratio

Available now via YETI.com

Wheeled Roadie 60

The Roadie®60 Wheeled Cooler is a maneuverable beast. With enough room for over 50 cans and wheels to navigate bumpy terrain –this was made for off-grid adventures with the entire crew. Built with the same durability and cold-holding power as the Tundra®Cooler, this wheeled cooler is virtually indestructible with the ability to hold ice for days. MSRP $500. Available via yeti.com on August 23, 2022.

Key Features

Periscopeâ„¢handle: this retractable, dolly-style handle pops up when you need it and hides away when space-saving is key.

Neverflatâ„¢wheels: solid, single-piece tire construction is impact-and puncture-resistant

Lipgripâ„¢handles: these streamlined handles stay out of the way to make carrying your catch (or cold ones) less of a chore.

Bearfootâ„¢non-slip feet: budge-resistant padding prevents rogue sliding on the boat or in the backseat.

Anchorpointâ„¢tie-down slots: the built-in molded tie-down slots promise easy mounting to your boat, trailer, or truck bed.

Bestdam™drain plug: This leakproof barrier offers quick-drain convenience.•Wine-friendly packing: Internal height is 13” –so (most) standard wine bottles, growlers, and two-liter bottles fit upright.

Accessories:

Clear Tritan Basket keeps provisions dry, in place, and protected

A divider separates and organizes internal space and doubles as a cutting board (sold separately)

Cupholder keeps drinks within reach without compromising cooler access (sold separately)

External dimensions: 23.74″ x 19.95″ x 20.50”

Empty weight: 28.8 lbs

Capacity: 51 cans using a 2:1 ice-to-can ratio

Amazon Prime Day: Fly Fishing Deals

Featured image from Amazon.com.

Amazon Prime Day has arrived and for those of you with an Amazon Prime membership, now is the time to cash in on some pretty epic deals on some pretty epic gear. Whether you’re shopping for yourself or trying to cash in on some early gifts for an angler in your life, we thought we’d share the deals we’re most excited about so you can save on the gear you need! Check them out:

Smith Creek Accessories

 

You may not be familiar with the brand itself, but you’ve likely seen these handy accessories hanging off your guide’s vest or in the fly shop. They’re always clutch when you need them, and won’t break the bank!

Shop here!

FRM Boards – Fly Fishing Belly Boat

If you’re looking for your next float tube or a way to access Stillwater fishing around you, a belly boat is the easiest and most portable means of doing that.

Shop here!

Collapsable Wading Staff

Wading staffs arent just for pops or that old angler pushing deep into the river, they’re a great way to keep yourself safe whenever you’re wading, or if you need that extra bit of traction to close the distance between you and that riser sitting in the far seam.

Shop Now!

Leader and Tippet Deals

Who doesn’t love saving some cash on the most used pieces of tackle in their fly fishing pack? While they may not be the top brand in the game, if you’re looking to save some cash and maximize your Prime Day savings, these will do the trick!

Shop here!

Telescoping Hook Remover

A good hook remover is one of the most underrated items that should belong in every fly angler’s kit. It’ll save the day (and the fish’s life) if you have a fish hooked deep and even eliminates the need to remove a fish from the water to release it, ultimately reducing handling time and fish stress!

Shop here!

Foam Dry-Dropper Holder Kit

If you’re anything like us, you know that keeping dry-dropper setups rigged and ready to go reduces rigging time and makes matching the hatch a breeze while on the water. This box of foam rings makes keeping your dry-droppers rigged and ready simple. All you need to do is wrap them up on each spool the night before and you’re ready for the water!

Shop here!

If you haven’t already, Join Amazon Prime and dig around through these deals before they’re gone until next year’s Prime Days!

All product images from Amazon.com.

Featured Fly Tyer: Jeffrey Feczko

0

Jeffrey Feczko is a professional guide and fly tyer, world traveler, captain, and a pleasure to talk with. Even the Dos Equis guy wants to live the life Jeff does. There may be nothing this man can’t do, which is why we decided to sit down and talk to him about just one aspect of his fascinating life: fly tying. 

Flylords: Let’s start off with a little bit about yourself, who is Jeffrey Feczko? 

Image courtesy of Jeffrey Feczko.

Jeffrey: Jeffrey Feczko is a freak who loves a challenge. I’m a lifetime angler, self-taught fly fisherman, and USCG 100T Master captain guiding in Bristol Bay Alaska & Baja Mexico.

Additionally, I’m also an award-winning Rio Signature tyer recently taking home the award for the best saltwater pattern at IFTD.  I have guided Alphonse, Astove, and Cosmoledo and fished all over the world including, but not limited to: Gabon, Ecuador, Colombia, Guatemala, Honduras, Mexican Caribbean, USVI/BVI, Christmas Island, BC probably other places I cant remember.

Flylords: Is there a favorite fly that comes to your mind? 

Jeffrey: Oooof that’s tough – my Camaronsiton is a confidence pattern for sure. Easy to tie, looks like a huge wiggly shrimp but also passes for a mullet/baitfish. It’s caught everything from brown trout to GTs.

Flylords: What gets your creative juices flowing? How are new flies born? Where do you start? How do you choose materials?

Jeffrey: Usually new patterns are born just trying to replicate a new food source with a little extra added wiggle or when a particular fish has frustrated the sh*t out of me and I need to stop their behavior. I like my materials durable and typically expensive, haha.

Flylords: In terms of all the gear out there involved in the fly tying process, what’s one piece of equipment you could never live without?

Jeffrey: A bobbin, mono thread, and sharp scissors.

Flylords: Which part do you enjoy more: fishing the flies, or tying them? 

Jeffrey: I like both of them a little bit – but really, fishing them is why I do it.😂

Flylords: How did you become a Rio Products Signature Tyer?

Jeffrey: I always saw Brita Fordyce’s flies and was so enamored with how beautiful they were that I’d show her my weirdest creations – she must have liked it cuz not terribly too long after she asked me to join and of course I obliged. I was and am truly honored for the opportunity.

Flylords: Do you have a favorite species you chase? What separates that fish from others?

Jeffrey: Roosterfish barefoot from the beach hands down. They’re uniquely beautiful and can reach over 100 pounds while also having a very small range of availability – especially where you can do it from shore with a fly rod. They are fickle like a Permit yet explosively aggressive like a GT – however, their behavior is completely unpredictable. Seeing a Roosterfish surfing a wave backlit by the sun is what I see when I close my eyes, which sometimes leads to insomnia. They are truly the love of my life.

Flylords: What is the process of creating a fly and then selling it? When do you know that it’s ready for production? 

Jeffrey: The fly needs to be a unique and consistent producer. I write a material recipe and do a photo step by step with instructions, then throw six in a bag and send them off to Rio – the rest is up to them.

Flylords: Do you have any advice for anyone looking to get starting in tying? 

Jeffrey: Just go for it, start with a few basic patterns (Gotchas, Clousers, Deceivers, EP baitfish) and explore from there. Think outside the box and look at everything as if it could be used as material. As cliché as it sounds, less is more a lot of the time. YouTube is a great resource as well!

Flylords: How did you create the Feczko Cheeseburger? Why should someone fish it? 

Jeffrey: I love a cheeseburger, how could you not? I think my pattern looks the equivalent of a cheeseburger, but for fish. It’s versatile as heck, looks like many different types of crabs, passes for a shrimp, and basically is just a Berkley power bait curl tail grub with dumbbell eyes. I created it in Seychelles while guiding Alphonse. It kind of just happened really, triggerfish will drive you mad there 1 – because they’ve definitely seen some flies, and 2 – they’re just tough to convince anyhow, they all seem to have individual personalities. They absolutely loved Cheeseburgers though.

Flylords: What is next for Jeffrey Feczko?

Jeffrey: I’ve got a few months left in Baja, then Alaska till October, then Mag Bay with the Los Locos till mid-January – after that it’s a secret.

A big thank you is in order to Jeffrey for taking the time out of his busy guide schedule to answer these questions. It was a pleasure to speak with him and pick his brain about the incredible life he gets to live every day. We wish him the best on his adventures! If you want to follow him on Instagram, his username is @tothegills.

Fishing Tips: The Pulley Retreive

The pulley retrieve is something that is seldom mentioned, but one of the most important concepts in fly fishing. Check out this video from Troutbitten for an in depth look at the technique all anglers need to master.

2023 Fly Fishing Show: Dates, Locations Announced

The Fly Fishing Shows are always some of our favorite weekends of the year. They offer a chance to get hands-on with new products around the industry, and to meet fellow anglers from around the country. After most of last year’s shows were postponed, the 2023 Fly Fishing Show season is just around the corner!

The 2023 Fly Fishing Show Schedule and Locations:

From The Fly Fishing Show:

2023’s edition of The Fly Fishing Show® will feature six venues north to south, east to west from Massachusetts to California, Denver to Atlanta, across the United States beginning Jan. 20 and concluding March 5, announced Ben Furimsky, show President and CEO.

“While each site and each show is unique to the community and region, they will all feature non-stop fly fishing seminars, casting demonstrations, classes with experts, fly tying, displays of the newest rods, reels, clothing, gear, and accessories; vacation destinations, conservation organizations, films, and hands-on educational experiences,” according to Furimsky.

Marlborough, MA – January 20, 21 & 22, 2023 – Royal Plaza Trade Center

Buy your tickets in advance, here!

Edison, NJ – January 27, 28 & 29, 2023 – New Jersey Convention and Exposition Center

Buy your tickets in advance, here!

Atlanta, GA – February 3, 4 & 5, 2023 – Infinite Energy Center

Buy your tickets in advance, here!

Denver, CO – February 17, 18 & 19, 2023 – Gaylord Rockies Resort & Convention Center

Buy your tickets in advance, here!

Pleasanton, CA – February 24, 25 & 26, 2023 – Almeda County Fairgrounds

Buy your tickets in advance, here!

Lancaster, PA – March 4 & 5, 2023 Lancaster County Convention Center

Buy your tickets in advance, here!

Washington Democrats Unveil New Report to Restore the Lower Snake River

Washington Governor Jay Inslee and Senator Patty Murray released their highly-awaited “Lower Snake River Dams: Benefit Replacement Draft Report” earlier this past June. The report summarizes all the benefits and costs of the four Lower Snake River Dams (LSRD) and facilitates public input on the possibility of removing the LSRD. The public comment period ends Monday, July 11th at 5pm PST. Additionally, while this report provides cost estimates for removing the LSRD and replacing their services, the report, nor its authors, makes no final recommendations.

Ever since the Congressman Simpson’s Salmon Concept, a Republican from Idaho, went stagnant, many advocates of breaching the dams had pointed to this report as being the next big step toward achieving a free-flowing Lower Snake River.

The draft report acknowledges that the LSRD provide significant benefits for the region–particularly as it relates to barging agricultural products and relatively cheap power supply. However, all these services are potentially replaceable, and the region can transition and save Snake River salmon and steelhead, which are both on a path towards extinction. Without removing the LSRD–which will significantly improve habitat, water conditions, and up and down river migrations–the fate of wild salmon and steelhead is all but certain.

Senator Murray and Governor Inslee issued a joint press release regarding the report:

“We continue to approach the question of breaching with open minds and without a predetermined decision. From the start, we have placed public and stakeholder engagement from communities across the Pacific Northwest as the foundation of any regional process. This continues to include consultation and advisement by federally recognized Tribes whose unique perspectives and sovereignty each of us deeply appreciates. We value the diverse perspective of the many stakeholders who have already provided input toward the independent draft report, and we look forward to hearing much more as this document is available for public review.

“Every community in the Pacific Northwest knows the value and importance of our iconic salmon runs—and every community recognizes the importance of salmon to our economy and cultural heritage. We each remain firmly committed to saving our salmon. We also know that the dams provide significant benefits to our region’s economy and communities. In the coming weeks, we will carefully review and consider public input, tribal consultation, and other engagement from stakeholders before making any recommendations.”

Tomorrow, Monday July 11 is the last day to comment on this draft report. So, head over to lsrdoptions.org, review the draft and send a comment advocating for salmon, steelhead, and a free flowing Lower Snake River. But also be sure to let Congress know that you support breaching the LSRD and recovering the region’s wild salmon and steelhead, because Congressional support is paramount to achieving these goals. Trout Unlimited has developed an Action Campaign to contact your Congressional representatives–Take Action Today!

How to Tie: Coffey’s Sparkle Minnow

0

In this week’s “How to Tie” video feature, InTheRiffle ties a streamer pattern that will entice quality trout year round, Coffey’s Sparkle Minnow.

Difficulty: Intermediate

It should be no secret in fly fishing that the species we target do not only eat flies. Pursuing predatory fish allows for some of the most exciting fishing opportunities. For trout, whether it is nymphs, dry flies, or streamers, there is a time and place for everything. Large fish can be caught in a multitude of ways using varying flies, but Coffey’s Sparkle Minnow is a streamer that gets the job in an extremely exciting way.

In terms of tying this fly, preparing dubbing loops in advance will make the process move quickly and efficiently. Coffey’s Sparkle Minnow is a more simple streamer pattern for its size, as it only requires marabou, krystal flash, and dubbing loops to create the profile of the body. Taking the time to tie this pattern will pay off on the river whether it is summer, fall, winter, or spring. Changing the colors to imitate other baitfish or juvenile trout is a powerful way to catch large trout in your targeted waters.

One of the best aspects of Coffey’s Sparkle Minnow is its ability to be fished in multiple ways. It can be stripped, dead drifted under an indicator, or swung. One of my personal favorite methods is fishing it under an indictor, with twitches as it moves. From my experiences, I have not seen a streamer produce consistent large fish like this pattern. Give Coffey’s Sparkle Minnow a try when you are on the water next, and let us know if you stick a trophy!

Ingredients:

Now you know how to tie Coffey’s Sparkle Minnow!

Video and ingredients courtesy of InTheRiffle.

Angler Story of the Week: Latitude Guiding Mike Kirkpatrick

A note from Mike Head Guide of Latitude Guiding New Zealand:

“Some fish just stay with you.
(I don’t mean you let them stay in your spare room and 6 weeks later they’re still there…) 😜 I mean they sit close to your recall, enthralling you over and over with their sheer quality, allowing you to relive the thrill of the fight and revel in that special moment of triumph. That you cherished them and released them with care, means another anglers dream might just come true.”

Check out the video below Fly fishing New Zealand:

Latitude Guiding consists of head guide Mike Kirkpatrick – proud member of the NZPFGA (NZ’s professional Guides Association). Mike considers himself blessed to be able to guide in one of the most stunning fly fishing playgrounds in the world.”

“Turbo Giants” from Blue Halo an Official 2021 IF4 Selection

In this Video of the Week, we catch up with Cortney Boice, Derek Olthius, & Phil Tuttle in their most recent IF4 selected film, “Turbo Giants”. The 3 set out to pursue one of the baddest fish in the ocean, The GT. With the help of Alphonse Fishing Co. the crew sets out to target the amazing fish diversity that Astove Atoll offers. From sight casting in the surf to GT’s blitzing bait, triggerfish feeding on the white sand beaches, or teasing GT up with poppers the boys do it all in one of the most amazing fishing settings in the world. Sit back and enjoy as the boys experience why the GT is the indisputable fish champion of the world.

Check out these awesome articles as well!

Lessons From the Baltics

Costa Sunglasses Releases “On Flats & Family – The Cyr Brothers”

FULL FILM: Jake Keeler Releases “Water Sabbath”

 

Wait. Wait. Wait. It’s Chubby Season

Terrestrial season is underway

Fly fishing big foam Stonefly and Grasshopper patterns is what every seasoned angler worships in the summer months. It’s that time of the year terrestrial fishing is at its best and every angler should endure while on the water.

While these hatches can be sporadic, trout are eager for a big meal. Get on the water, and try fishing a Chubby Chernobyl, Amy’s Ant, Morning Wood Hopper, or a terrestrial pattern of your choice.

Glossary

Single Terrestrial Dry Fly Fishing Tips

Dry Dropper Fishing

How to tie a Chubby Chernobyl

Chubby Chernobyl Fly Recipe

Gear

Single Terrestrial Dry Fly Fishing Tips

When fishing single Grasshopper or Stonefly adult patterns, trout can be very opportunistic to eat your fly from the first to fifth cast within the desired water you are fishing. Personally, when fishing single dries and terrestrial patterns, I fish 2-4x 9 foot leaders. I like the distance of this leader because you’re only throwing one fly, as opposed to throwing multiple. When fishing these patterns, always look upriver behind rocks, boulders, specifically targeting the banks of the river before you start fishing the deeper pocket water. Ultimately, try and fish closest to you, trout can eat grasshoppers even in three inches of water.

After taking your first few casts fishing single terrestrial patterns, work your way deeper across the river. Ideally, in very clear, low water mending can be challenging. The goal is to try and create a natural drift with that single dry. Try to limit the amount of mending you do when you’re fishing dries. Sometimes, this can create an un-natural drift towards the end of your drift. When the fly gets submerged underwater, pull the fly out, take a few back casts and re-cast. When you see trout rise, don’t throw the fly directly where it rose. Take a minute, inspect where the fish is nosing up and cast three to five feet above the fish.

When the fish eats your dry fly be patient. Sometimes little trout will be very eager and crush it on the top water. When fishing these patterns, larger trout will come up slower to eat that fly. Be patient, and set that hook!

Dry Dropper Fishing

In the summer months, sometimes you won’t get trout to eat single terrestrial or stonefly adult patterns by themselves. This can be from the veteran trout seeing these flies too many times, just looking up, flashing and rejecting your hopper pattern. Throwing a dropper below your dry fly will help bring fish to the net when they are seasoned.

When on the water fishing dry dropper, we can accomplish this by simply trying fluorocarbon tippet to the end of your hopper. For bigger rivers, I prefer fishing deep. This means, don’t be afraid of cutting twenty plus inches of tippet off of your spool when tying on to you hopper. Remember, your Chubby Chernobyl is your indicator fly when fishing a dry dropper rig. When it moves un-natural with the water surface or gets pulled down like a strike indicator, set that hook!

My go-to-rig when fishing dry dropper is to fish a 2-4x 7.5 foot leader. I like fishing shorter leaders when throwing dry droppers since you add twenty plus inches of tippet below your buoyant dry fly. This will improve your accuracy and power, while not being a pain to cast with a 9 foot leader.

How to tie a Chubby Chernobyl

Chubby Chernobyl Fly Recipe

Gear

Scott Centric Fly Rod – $945

Ross Reels Animas Fly Reel – $360

Airflo Superflo Universal Taper Fly Line – $100

Airflo Trout Polyleader 7.5ft-8ft – $14

Umpqua Phantom X Ultra Fluorocarbon Tippet 2-5x – $19.99

Chubby Chernobyl Tan #8-16 – $2.99

Loon Outdoors Fly Dip – $12.50

Loon Outdoors Top Ride Dry Shake – $11

Check out the article below for dry dropper and terrestrial fishing:

How to Rig a Dry Dropper Set Up for Beginners

Article from Winter Park Flyfisher guide and Intern of Flylords Magazine Nelson Oxley, give him a follow on Instagram at @nelson_oxley.