Home Blog Page 199

Wading Safely: A Wading Gear Guide [2020]

With peak float season quickly drawing to a close, there’s no better time than the present to take an inventory of your wading gear for the low flows and cold months to come. Our wading gear guide will help ensure you stay safe and dry pursuing your favorite species on the fly this fall and winter.

Base Layers

While we’re still in the heart of hopper season, cool autumn mornings and snow aren’t too far off. Having the proper base layers will help you weather any surprise rain, snow, and cold fronts that come your way. Layering on your feet, legs, and torso will help the chill off while still allowing you to remain mobile and safe. 

Pants

The Patagonia Shelled Insulator Pants have an adjustable cuff and fleece lining. My go-to winter pants.

In milder weather, I usually wear a pair of wool socks, thin leggings like the Patagonia Capilene Midweight Bottom, and my favorite hiking pants to keep my legs warm. When the temperatures really drop, I turn to some quality layers from Patagonia. On my legs, I wear the Men’s Shelled Insulator Pants. These soft-shelled pants have a fleece lining that helps keep me on the water in sub-freezing temperatures. Pairing the Insulator Pants with some leggings should be all you need to keep your legs warm under waders throughout the coldest of months.

Jackets & Vest

On my torso, I wear Patagonia’s Nano Puff Hoodie for the majority of the year. This versatile layer can be worn with a T-shirt in warmer temps (mid-60s) and layered all the way down to sub-30s with comfort. My favorite aspect of this jacket is that it’s relatively thin yet still provides warmth and wind protection when necessary. The Nano Puff Hoodie fits effortlessly under my waders even with some additional layers.

Vests are another great layering option as they help keep your core warm without limiting your arm mobility throughout a cast. Whether you opt for a down, fleece, cotton, or any other synthetic, I’d recommend throwing a vest in your trunk. The Simms Rogue Fleece Vest is a great option for the upcoming shoulder months. 

Waders

Waders are one of the pieces of equipment that can really make or break your day on the water. If you’ve ever had leaky waders on a cold day, I think you’ll agree. If your waders fail in the winter you run the serious risk of frostbite and hypothermia. For that reason, it’s worth considering purchasing a quality pair of waders even if you only get out a few times a year, as they’ll likely last you many seasons.  I typically like to buy waders and boots with a little extra room to allow for layering in colder months. The offerings below are sure to last years and years of abuse and come backed by quality companies and guarantees and are also some of the favorite choices of @teamflylords. 

Simms

Simms G3 Stockingfoot Waders

@wmdfly putting some bend in his 5 WT wearing Simms G3 Waders.

The Simms G3 Stockingfoot Waders need no introduction. These American made waders have traversed waters across the globe and are worn by male and female anglers alike. While they come with a hefty price tag, they are sure to handle whatever you throw at them. Simms G3 Stockingfoot Waders are made with premium GORE-TEX® Pro Shell 3-layer uppers and 4-layer lowers that provide top-notch durability and flexibility. They shouldn’t fail you for years to come, however, Simms has customer service worth writing home about in the event that you spring a leak.

Simms Freestone Waders

Chasing down a feisty brown in my Simms Freestone Waders.

The Simms Freestone waders may come with a more wallet-friendly price tag compared to the G3 waders, but they certainly don’t lack any features and come backed by Simm’s quality and materials. The Freestone’s are made of a 4-layer Toray fabric that is incredibly durable and still maintains breathability. These are my personal choice of waders at the moment and I don’t have a single complaint after 75+ days on the water.

Patagonia

Patagonia Men’s Swiftcurrent Expedition Waders

Flylords Founder @jzissu slinging one in his Patagonia Swiftcurrent Waders.

New for 2020, Patagonia’s Swiftcurrent Waders are the most technically sound offering from the manufacturer to date. Pockets, removable internal knee pads, and adjustability like the convertible chest to hip functionality and cinch top give these waders a custom fit. To many anglers, an added benefit of these waders is that they’re made from recycled materials. If you’re tough on your gear, we’d recommend putting the Swiftcurrent Waders to the test. 

Orvis

Orvis Pro Waders

The Orvis Pro Waders. Photo courtesy of Backcountry.com.

The Orvis Pro Waders are the new flagship wader from Orvis and blow previous models out of the water. Orvis chose to use a proprietary 4-layer Cordura® fabric shell in the upper and 5-layer Cordura fabric shell in the lower to achieve industry-leading abrasion and puncture resistance. Like the Swiftcurrent Waders from Patagonia, the Orvis Pro Waders come with removable knee pads, a feature that really shines crawling through streamside brush and over boulders to reach the most inaccessible fish. 

Orvis Clearwater Waders

The Orvis Clearwater Wader is the most pocket-friendly offering on this list and still manages to pack a punch above its price range. These waders incorporate many of the stylistic and design features as the Pro Waders like the new integrated gravel guard and waist-high conversion but come in a 4-layer nylon fabric as compared to the 4 and 5 layer Cordura® shells on the Pro. Like all other offerings on this list, the Clearwater waders have anatomical neoprene booties that help contour to your foot.

Boots

Having a quality pair of wading boots will help keep you upright and dry throughout the seasons. A benefit that is extra important during colder months when the risk of hypothermia looms. Felt soles can be dangerous in colder months as they will quickly ice over.  I opt for rubber-soled boots that are practical year-round.

Simms G3 Guide Boot

The Simms G3 Guide Boots have over-sized abrasion-resistant panels on the uppers.

The Simms G3 Guide Boots have been around in their current iteration since 2018 and is one of the longest-lasting options on the market. These boots come equipped with Vibram soles and an enhanced abrasion-resistant upper. The G3 Guide Boots are my personal choice and they have been great since I equipped them with HardBite Studs (more on studs/cleats later).

Patagonia X Danner Foot Tractor Sticky Rubber Wading Boot

That Patagonia X Danner Foot Tractor wading boots are handcrafted in Portland, Oregon.

When Patagonia and Danner set out to create the Foot Tractor Wading Boots, their goal was to create a wading boot that would last a lifetime and they achieved just that. Handcrafted in Portland, Oregon, the Foot Tractor wading boots are able to be recrafted and resoled over time. While the price tag may scare a lot of buyers away, making an investment in quality gear will help eliminate dreaded equipment failures when you least expect it. 

Orvis Pro

The Orvis Pro Wading Boots are built to go wherever you take them.

Along with their new Pro Waders, Orvis also released the Pro Wading Boots. In collaboration with Michelin (the tire manufacturer), Orvis was able to achieve industry-leading wet-rubber traction and increased abrasion resistance. The Orvis Pro Wading Boots also come with OrthoLite® insoles to help deliver maximum comfort all day long. 

Other Gear

Once you have base layers, waders, and boots that you can rely on, there is some other gear to also consider. Purchasing a wading staff and cleats for your boots will ensure traction on even the slickest surfaces.

Wading Staff

Wading staffs, like the Simms Pro Wading Staff, are invaluable when traversing swift waters.

Carrying a wading staff is one of the single best ways to stay safe while wading. Often collapsable, wading staffs provide stability in swift currents and on slick stream beds. The Orvis Ripcord Wading Staff is a lightweight, compact option, and comes with a manufacturer lifetime warranty. The Simms Pro Wading Staff is another premium option made with carbon fiber tubing and a contoured cork grip. Both wading staffs fold to about a foot long and come with carrying pouches. Trekking poles, ski poles, and even a hearty stick can serve the same function for a fraction of the price.

Cleats

Simms Hardbite Studs. Photo Courtesy of Simms Fishing.

If you’ve read any of my other gear articles you’ll know that I’m an advocate for wading boot cleats. Regardless of whether you wear felt or rubber-soled boots, there a ton of options on the market. These cleats will provide added traction on slick surfaces whether you’re traversing moss, mud, ice, or snow. If you’re interested in learning more about the benefits of wading boot cleats, be sure to check out our comprehensive breakdown. 

Fish On…

As the wet wading season is quickly drawing to a close, consider taking inventory of your wading gear for the cooler months ahead. In addition to gear, wading responsibly is another great way to ensure a warm and dry fall/winter season.  It’s helpful to remember these few simple tips while wading:

1. Always take your time.

2. Keep your body perpendicular to the current.

3. Always keep one foot firmly planted before taking your next step.

I often enjoy a day of solitude on the river, however fishing in high or cold water can be dangerous and it’s best to fish with a friend. If you like to fly fish year-round regardless of the weather, having quality wading equipment is of paramount importance. These offerings from Simms, Orvis, and Patagonia are sure to meet the needs of the most demanding angler. 

Article by Evan Garda, he is on the Content Team here at Fly Lords. He can be found chasing trout throughout the west with his trusty fly rod. Check out his adventures at @evangarda.

Simms Releases Anticipated Fall 2020 Line

https://theflylords.com/fishing-trip-checklist/

SA Releases Amplitude Smooth Infinity Line with Glow-in-the-Dark Tip

1
SA’s Amplitude Smooth Infinity Glow

Finally, a line that will make it just a little bit easier to see where your flies are in the dark, without lighting up the entire river. Glow-in-the-dark lines are nothing new to fly fishing, but in the past, the entire lines would glow, which made them feel gimmicky and certainly less than stealthy. Enter Scientific Angler’s new Amplitude Smooth Infinity – Glow tip line.

Now instead of lighting up your whole line like an airstrip at night, just a section at the head of the line will be lit, making it far easier to pinpoint where your flies are and avoid casting your rig into that overhanging rhododendron bush on the far bank.

Some may say that the glowing line section has the potential to make your casting more conspicuous and spook fish, however, Angling Trade’s Kirk Deeter got his hands on the line and had this to say:

“I’m not a scientist, but I can tell you that I caught a number of rising fish that obviously didn’t seem bothered at all  I think things like the drift, and accuracy, and not lining fish with any colored line, glow or not, matter 100 times more than line color.”

Read the rest of Kirk’s review, here. 

We’re looking forward to getting our hands on this line soon, and if you’ve had a chance to try it out, let us know your experience in the comments!

Video of the Week: Insight- The Trophy Quest

As fly fishermen, we love to dream of big fish, dreamscapes of beautiful drastic valleys, and big topwater eats. But most of us don’t just dream about it, we entangle our everyday lives with this thought process. Which is why we watch fly fishing videos. To not only learn but to dream and to create goals for yourself as a fisherman. With that being said, Mike Kirkpatrick of Latitude Guiding in New Zealand has brought that dreamscape world to film. Mike’s youtube page “Mikefsher” has graced the internet with some of the most unbelievable videos and stories. This week is no exception. In his short video for his feature-length film called Insight – The Trophy Quest we follow Mike and friends as they pursue massive wild browns in the New Zealand backcountry on mice.

 

“Sometimes in your life as a fly fisher, the stars align to offer a fleeting moment. A happening of maybe once in a generation event. This happened to New Zealand’s South Island last season. With several locations experiencing the largest mouse plague in 75 years. The trout in these areas are rumored to have grown to prestigious sizes due to feeding on these mice at night….”

Image Courtesy: Mike Kirkpatrick
Image Courtesy: Mike Kirkpatrick

You’re going to want to grab a seat for this one as you watch some of the most skilled anglers square up against some of the largest brown trout in the world. You can rent or buy the full film here: https://vimeo.com/ondemand/insightthetrophyquest 

Feature Image Courtesy: Mike Kirkpatrick

Video of the Week: Trucha a Hooke Film

 

Watch These Mice Get Smashed by New Zealand Brown Trout

Building the Stoke in New Zealand – an Interview with Guide Alex Waller

Artist Spotlight: Andrea Larko

In the latest Artist Spotlight, Flylords caught up with Andrea Larko, a well-known angling artist based in the North East. Check out the full interview below to learn more about Andrea and what goes into her beautiful art.
Image courtesy of @andrealarko

Flylords: Tell us a little bit about yourself?

Andrea: I have been drawing and painting as far back as my earliest memory. When I was a kid we didn’t have a lot of coloring books. A blank piece of paper was my inspiration to create anything I could imagine. Creating something unique compelled me and has stuck since I was a kid.

While I was in junior high school I found myself gravitating toward the arts and through senior high enrolled in as many art classes as my schedule would allow.

Doodling kept me occupied and focused through school and college during my core curriculum courses outside of art. If I didn’t have paper or a sketchbook in front of me, I found myself doodling on the top of my jeans or even my arms and legs. I wouldn’t recommend that though, especially with sharpies. Meditative doodles appeared alongside my notes and even animated flipbooks through my vocabulary workbooks. 

Drawing was my outlet to stay relaxed, focused, and keep my anxious mind from overthinking. I kept a little sketchbook along with pens, pencils, or markers in my purse as a welcome distraction before smartphones were the norm. When I applied for college I knew I wanted to be an artist but didn’t know what kind, nor did I know if it was a realistic expectation. l took courses in art ranging from drawing and painting to printmaking, screen printing, glass blowing and flameworking, installation art, animation, design, ceramics, metalworking and casting, gallery management… the list goes on. Through my uncertainty in direction there was always one common thread I enjoyed in all of those courses. It was the planning and sketching of my ideas that I found most interesting. The bottom line, I knew I wanted to go into the fine arts. 

My realistic side told me I wouldn’t be able to make a living as an artist. Illustrators didn’t have regular, stable 9-5 jobs anymore, which was more common in generations before mine, and I didn’t want to be a starving artist. I made the decision to major in graphic design at the Rochester Institute of Technology because it seemed to be creative and more stable to find work after graduation. However, after my first year at RIT I became bored with the coursework and didn’t feel like I was able to use design as artistically as I had hoped. I spoke with my advisor about my concerns and was directed to the Illustration department since they also had the design courses but would be able to create and enjoy the fine art side of the program as well. I was told as an illustrator I would have the edge on a graphic design degree because I could have a position as a designer but if a client needed a spot illustration I would also be able to fulfill that role. It sounded like a perfect fit for me, so I switched my major to Illustration my second year at RIT. After I graduated I did find a job as a Designer/Illustrator and it was just what I was looking for. 

Since then, I’ve held a few other positions, and even when one wasn’t related to art and focused more on design or advertising I would still draw little doodles for my coworkers to hang in their cubicle to brighten their day. 

Image courtesy of @andrealarko

Flylords: When did you start fishing and when would you say it had an effect on your art?

Andrea: It’s a mix of luck and circumstance those two came together. My 3 sisters and I enjoyed the outdoors growing up and our parents took us fishing and camping often. Spending time outdoors was my favorite part of childhood, I felt most like myself when I was in nature.  
When I moved to Rochester, NY for college my focus shifted to my job and coursework. It left little time for enjoying outdoors outside the city. My father and sisters decided to plan an annual trip to Oak Orchard NY every fall for king salmon and fall-run brown trout. I looked forward to that weekend as my decompression before my courses and job at the college took precedence. Less than a year after graduating, the economy started to dwindle which made it difficult for me to stay in NY. I made a quick decision to move back to Pennsylvania and settle back in my hometown. Depression set in as the reality of my quick decision was now my new normal. I had no job, moved away from my friends and a life I had become accustomed to and really loved. I felt like a failure and needed a reason to get out of bed every day. Finding solace in my art and by being back in nature, I started fishing regularly again. Growing up as a spin and bait fisherman I was always compelled by the fly anglers I saw while on the water, including my mother who took an appreciation for it. When I met my boyfriend, Zeb, he bought me my first fly fishing setup. Having so much fun with it and we both began fly fishing together. It was something that bonded us early on and we still enjoy today. When we began tying our own flies I wanted to paint some trout for our fly tying area. I posted photos of the oil paintings on social media and had a wonderful response. Commissions for more fish art began to come in. 

I drew a trout outline in one of my sketchbooks and was brainstorming for a new commission when I ended up just filling in the fish with the meditative doodles I’ve done since I was a kid. Since that first fish doodle, now called “zentangle” style, I have created over 100 illustrations of different fish for clients all over the world. Zeb also found an outlet through fly fishing and now is one of the top fly rod builders in the world, in my unbiased opinion. Running Snowman Custom Rod Works he builds custom rods to suit each of his client’s fly fishing needs. From machining his own hardware and even creating signature rod tapers he has a hand in every part of the build from start to finish. 

Image courtesy of @andrealarko

Flylords: You have an incredibly unique style. What would you say your influences are when creating a new piece?

Andrea: I’m influenced by the beauty of fish I catch and the tranquility when I get to spend time in nature. As far as my style, I didn’t think I had one. I enjoyed doodling and never took it too seriously alongside fine art and other illustrations. It was more of a happy accident they came together with fishing. I often get messages or comments on my work from people all over the world comparing it to something meaningful to them and their culture. Mostly from tribes and tribal artwork, but from every corner of the world, each with their own unique feel. I find it compelling how each person can see something different in the same image. Isn’t’ that the best part about artwork though? 

Image courtesy of @theforgedfly

Flylords: What is your favorite medium to work in?

Andrea: I enjoy mixing media in my work. The zentangle designs began as pencil sketches. Once clients started asking for them as commissions I knew I had to clean up my line work so I started using Rapidographs on Bristol paper. A few years later the iPad Pro was released and made a huge difference in the amount of time I put into a piece since I no longer needed to redraw an entire piece to make changes. Drawing digitally eased the process and cleanup from scanning original images and editing. I still was working long hours staring at a screen and it began to take a toll on my eyes, so recently I have been taking a break from the digital work and into miniature original watercolor character fish for a refreshing change of pace.

Image courtesy of @andrealarko

Flylords: What would you say your favorite way to fly fish would be?

Andrea: I like to keep learning new things from my art to fly fishing. So I recently have found an interest in wet fly fishing. Purchasing some books on techniques and wet fly patterns I looking forward to this spring on the water to give it a go. 

tarpon reel
Image courtesy of Abel Reels

Flylords: When did you start working with Abel Reels and what is it like seeing your work on one of the most prestigious fly fishing reels?

Andrea: I was contacted by the son of the owner of Abel in 2013. He told me he would show his father some of my work because I was looking to make a custom reel with my artwork on it for my boyfriend as a gift. Fast forward 2 years, I received an email from Doug Dragoo introducing himself and writing, “I LOVE YOUR ART”. That email began a wonderful collaboration between me and Abel. Releasing multiple designs over the years since, and hopefully, more to come, I’m more than honored, I’m flabbergasted to be working with such a wonderful company and such great people. Their reels are not just beautiful but engineered and crafted so well with attention to every detail. My last tarpon reel design took 2 years in the making to come onto the market. Abel wants to make sure everything is perfect for their customers and I have a great deal of respect for that, I couldn’t be luckier to work with the amazing people I’ve met at Abel. 

Image courtesy of @andrealarko

Flylords: I’ve recently seen a really beautiful hand-painted Vedavoo bag you did. What was that for?

Andrea: Scott Hunter was one of the first people in the industry I worked with on apparel design. I owe a lot to Scott for believing in my work and wanting it to be a part of Vedavoo. He began a project a few years ago where he’d send a group of artists a piece from the Vedavoo line to paint on in order to raise money for a nonprofit organization. This past year I decided I wanted my design to show an appreciation for classic salmon flies. When my boyfriend and I began fly tying, we started tying trout flies and eventually wanted more of a challenge. What is more of a challenge than tying classic Atlantic salmon flies? I then found a new appreciation for the patience these fly tyers must have had to take an entire day or more to correctly tie a fly well. I decided my Vedavoo messenger bag would pay homage to those dedicated individuals. The proceeds from each bag were donated to a cause of the artists choosing. My choice this year was a donation to the National Multiple Sclerosis Society. I cannot fathom the daily struggles those who have MS deal with on a daily basis, including my older sister who was diagnosed about 6 years ago. I’m so thankful to Scott for setting up this entire project out of the goodness of his heart. He’s a dedicated, talented, devoted and incredibly thoughtful man to assemble a project that holds a lot of meaning to so many people. 

Flylords: Do you have any other collaborations?

Andrea: With reels, I work exclusively with Abel. I also have a few designs currently available through Montana Fly Company and more in planning. I designed the logo for the Mayfly Project and am currently creating a new side project for them as well. I worked with Simms as an artist to release the beginning of their women’s apparel line and a few years after that and hope to work with them again in the future. With over 100 commissions currently licensed throughout the industry from family-owned fly shops and guide services to larger companies and down to personal tattoos, I keep busy. One of my more unique collaborations was with a metal worker to build an entry gate to a property at the end of a driveway. It was great to see how it all came together from the sketching process down to the installation of the gate and the sheer scale of the gate when it was completed. 

Image courtesy of @andrealarko

Flylords: So, what’s up with Bob? Who is he?

Andrea: Bob is the epitome of every fly fisherman. Where they began and the struggles of misadventures on and off the water. He is the fly fisherman we all are but don’t always want to admit. Fly fishing has a stigma of arrogance surrounding it from outside anglers. Seen sometimes as pretentious I wanted to show the truth of fly fishing through my cartoons and air out some of the misconceptions others may hold. When I began fly fishing, learning through trial and error, mostly error, I made every mistake in the book, and some maybe never seen before. It was really frustrating but all I could do was laugh about it. Over the years I took mental notes of my mishaps and those I also saw others having while I was fishing. Social media was also a wonderful source for new material. Fans of Bob shared their own stories with me and Bob had quickly become a regular in my repertoire when I found the time at the end of my evening. I’m hoping to create enough cartoons to release a book of the misadventures of Bob in fly fishing soon. 

Image courtesy of @andrealarko

Flylords: Of all the fish you have turned into art, which is your favorite to catch?

Andrea: My favorite would have to be fishing for either brook trout on blue lines or wild brown trout. My boyfriend and I started seeking out water that wasn’t stocked which led us on some fun and adventurous excursions to remote water and beautiful native and wild fish. I fell in love with their color variations and was over fishing for stocked trout and have had a love for wild trout ever since. Wild trout are spooked very easily and they’re a challenge to find and trick into taking a fly. When I catch a wild trout I feel like I did something right. It gives me a sense of accomplishment in my angling skills and it’s never a dull moment. In a world of uncertainty and chaos, the moment you catch a fish it’s just pure happiness and everything else going on in your life fades into the background. I cling to those moments. 

Image courtesy of @andrealarko

Flylords: Any tips for aspiring artists?

Andrea: In any career path it’s always necessary to pay your dues, but my best advice for aspiring artists is don’t sell yourself short. I’ve seen so many hard-working, incredibly talented and skilled artists undercutting their worth by giving away their art to “get their name out there”. By doing so, they don’t realize they’re setting a standard for their worth in the future and end up detrimental if they ever decide at some point their time is valuable. At that point, it’s very difficult to expect value in your work from clients and customers when you have already set the bar so low on your worth. Whether it’s a hobby or a full-time career, the artwork is called work because it is. Although artists are not valued on the whole for their time and effort to create something out of nothing, it is a very difficult, time-consuming and mentally exhausting job to have. It’s worth more than most give credit. Don’t let anyone convince you it’s anything less. 

You can Check out and pick up some of Andrea’s artwork at https://www.etsy.com/shop/andrealarko.

Fly Fusion Magazine and IF4â„¢ Announce the Stimmie Awards Finalists and Silver Award Winners

0

The Stimmie Awards, presented by Fly Fusion Magazine and IF4 celebrate emerging filmmakers and creatives in the fly fishing industry. Entries were open to the public as long as the film was produced after Jan 1, 2018. You’ll likely recognize most of the names on the list, and we’ve had the pleasure to speak with most of the creators about their projects. Viewers will have a chance to vote for their favorite film to determine the Grand Prize winner, whose film will be featured in the 2021 IF4 festival!

From IF4:

Fly Fusion Magazine and the International Fly Fishing Film Festival (IF4) announced that the inaugural Stimmie Awards Top-12 Virtual Vote will begin on September 1, 2020. The grand-prize winner will be revealed on September 21, 2020.

The Top 12 films up for the Virtual Vote, in no particular order:

“Through His Eyes” by Spencer McCormack

“A Warrior’s Story” by Cameron Cushman – Check out our interview with the filmmaker!

“Imperfect 10” by Ben Fields

“Capitaine” by Johann Vorster – Check out our interview with the filmmaker!

“Anyone’s Adventure” by Teddy Cosco, Maddie Cosco, and Lindsay Derer

“Belize Buffet” by Gilbert Rowley and Phil Tuttle

“After the Man” by Alec Salisbury – Check out our interview with the filmmaker! 

“Born to Fish” by Michael Menten and Bronson Whytcross

“A Winter Passion” by Callum Conner

“The Art of Fly Fishing” by Andrew McNeece

“Big Land” by Chase Bartee and Aimee Bartee – Check out our interview with the filmmakers!

“Gaula” by Alvaro G. Santillan and Fabrice Bergues

The Stimmies, a new film awards platform, designed to highlight up-and-coming fly-fishing filmmakers, was inundated with submissions throughout the summer. Over the past month, these entries were narrowed down to the Top 12 which will participate in the Angler’s Choice Virtual Vote. Voting will take place on the IF4 website, here: flyfilmfest.com/stimmies

Silver Award Winning Films

An additional 8 films received Silver Awards and will be featured online at Fly Fusion Streaming (flyfusionstreaming.com).

Those films include:

“Rendezvous” by Ed Sozinho

“Gold Rush” by Callum Conner

“Short Bus Diaries, Volume 1” by Scottie Finanger and Bryant Patterson

“Josh and the River” by Ross Bondenmann

“It’s an Island Thing” by Pavel Francev

“Soren” by Travis Bradford

“Unheard” by Hilton Graham

“Passion on the Fly” by Paul Angeli.

New YETI Presents 2020 Collection Premiering on Youtube

0

Holding to the theme of virtual film festivals, YETI is premiering their latest collection of YETI Presents films on Youtube September 3rd at 7:30 pm CST. The annual collection features outdoor adventure films of the highest caliber and now more than ever we need chances to escape into the wild!

From YETI:

“Maybe we aren’t all anglers, or cowboys or pro snowboarders. Most of us will never paddle the open Pacific Ocean, or grapple with the responsibilities of being a parent and a Sherpa. But we can all understand strife, loss, drive, family, accomplishment in the face of doubt, and pursuing what makes us feel alive. These short films are those stories, our stories. This is YETI Presents.

This year’s YETI Presents Films:

– Lean Against the Wind | directed by Keith Malloy

– Finding Ground: A Geoff Rowley Story | directed by Greg Hunt

– A Prayer for Joshua Jackson | directed by Ryan Heffernan, Grayson Schaffer, and Kahlil Hudson

– Sandbagging Jimmy Chin | directed by Leisure Rodeo

– Ingrained | directed by Jimmy Chin and WRKSHRT

– Kekoa | directed by Chris Murphy and Zach Johaneson

– Mothered by Mountains | directed by Renan Ozturk and Ben Ayers

– The Ridge of Dreams | directed by Ben Sturgulewski and Zack Giffin

Making the Switch Part 2: Switch or Spey

Skagit casting has a long history before arriving here in North America in the mid-’80s. It has changed immensely and the line systems, now with shooting heads and tips, and rod technology (shorter and lighter) have changed the game and it would have not been this way, if not for the Skagiteers. There are so many pioneers and awesome educators in this style of casting, maybe more than any other. They all have helped the sport grow and change the face of two-handed casting as we know it today, whether its rod building, lines, tips for the casting style, and everything in between. We have so many options and can fish any style we want thanks to their innovation and imagination.

Spey casting used to be traditionally for salmon and steelhead, but that’s not the case anymore. Now anglers are using them for just about every species, from Taimen to Smallmouth, anywhere moving water is found.

The author getting done on the swing

How Do You Decide Between a Switch or Spey Rod?

Two-handed casting has many advantages, longer cast, casting in confined areas, like high banks or trees overhanging, if you have shoulder or arm issue, casting with two hands may keep you on the water longer. You will want to try either a Switch rod or a Spey rod, both have their advantages and disadvantages. Most single hand casters gravitate to the switch rod, the idea is, it may be easier to transition, or they can cast it single hand if need be. Not all switch rods are created equal, as there is no standard in how they are made a 7 WT from one manufacturer may be only a 6 WT in the other. Even within the brand the grain weights or actions can be different. This is the most difficult challenge, deciding how you are going to fish or more importantly where.

Switch rods come in a variety of weights, usually, 5 through 8 WT, are shorter than Spey rods (usually between 10 and 12 ft), and can be cast with two hands or single hand/overhead. It’s a great tool for Great lakes steelhead on small tributaries, confined areas, they have the ability to nymph fish, fish an indicator, cast streamers, and swing flies, etc.. It’s good at a little bit of everything, but some rods are better at nymphing while others are better at swinging. It’s in the manufacturing process, when they make a switch they lean to a little more single hand type or Spey type blanks.

Depending on how you want to fish will dictate the line system needed. The options for lines are endless but are now easier more than ever, a shooting head style or integrated lines, are also options within those lines. This is the problem of why people don’t make the switch.

If you’re not sure how you want to fish, just like with single hand rods, they have all-around lines that do a little bit of everything well. Brands like Rio (Switch Chucker), AirFlo (Switch Float Line), and SA (Skagit lite) all have integrated lines that simply require adding a leader and fishing it how you want. A great way to fish switch rods is in small streams and tributaries. If you want to use the switch rod to its maximum potential, I recommend having two spools for your rod, one for indicator/nymphing fishing (integrated line), and the other for swinging flies (with a head system). Now you can just about fish any water, condition, style, or fly, all on one rod.

Why Choose a Spey Rod?

As you’re looking at what Spey rod to add to your quiver, the rod size and length will vary by species and locations. If you fish big waters with high banks where you’d need a long cast, or you’re chucking big flies, a Spey rod may be a better choice. The choice is more about working smarter, not harder, to cast your flies and adding another weapon in your fly fishing strategy arsenal.

In recent years the rod manufacturers are trying to keep up with the trends and anglers. To make things easier let’s break two-handed rods into various categories, Trout Spey, Short Spey, and Full Spey.

Smallmouth bass on Spey
James Joseph catching bass on the swing

Trout Spey

They call them Trout Spey or Micro Spey and they range from 1-5 WTs, however, they are still 10.5 to 11.5ft long and can be lined up with up to 390-grain lines. They can chuck a decent size fly and are awesome for fish up to around 10lbs. They’re especially useful for summer steelhead, smallmouth, and walleye in rivers.

Short Spey

These are 6-8 WTs used for medium to large rivers, they usually reach around 12ft to 13ft in length and excel in using today’s high-tech short heads and are the perfect choice for steelhead and salmon or when more line weight is needed to toss larger flies or deal with high winds.

Full Spey

Full Spey are rods 13ft and longer available in 6 to 10wts and capable of casting huge lines, flies, and big fish like Taimen or Atlantic Salmon. If you fish steelhead on large rivers a 12 to 13.5ft would be the best all-around rod for most situations in North America, with today’s high-performance rods and compact lines, you will be able to cover almost any situation or species.

Most manufacturers either have their rods’ grain weights on the blank or their websites, such as Rio (in the Spey learning pages) and OPST, both of which have line matching charts for all the well-known rod makers.

Lines: Scandi or Skagit?

This is where things get confusing for some, how to pick a line. The easiest way is to decide how and what you are going to fish for. If you want to fish dry flies then you will need a Scandi line. If streamers are your thing, then you will need a Skagit line. Within those styles of lines, there are many options and a few nuances that give you the option of adapting to changing conditions. There are a variety of lines, but to get you started a Scandi and a Skagit are a great way to start.

Scandi Lines

A Scandi line is a longer head (20 to 40ft) and tapers to the tip, allowing for a delicate touch. You’ll attach your running line to the rear, then add a long 10 to a 15-foot mono leader to the front and you can fish as is. A better option would be the poly and versa leaders that can be added as well. Those are tapered leaders with tungsten coatings designed to get various sink rates. With a Scandi head, they struggle to throw large heavy flies and strong winds.

Skagit Lines

Enter the Skagit head, it was made to throw large flies and heavy sink tips. Mass moves mass and the heavy, short aggressive 15-24ft head does it with ease. A Skagit line is easier to cast for beginners with big fly high winds, or high banks. A sinking tip added to the tip and is required for the line to cast properly. Also, they are the best for casting with little to no backcast.

Two handed combat
The author using his skills on the two-hander

Choosing Your Tips

The tips required to cast Skagit heads are different than those for Scandi heads. But, there is some crossover between the two and some Scandi tips can be put on Skagit lines.

In the beginning, a Skagit tip was a piece 10 to 15ft of level sinking line to achieve the desired swing. The 10 and 12ft being the most popular. They come in various densities, such as T7, T8, T10, and T14 or light, med, heavy, and Xtra heavy. The “T” is the tungsten material it’s made of and the “7” being the sink rate in inches. They are still used by a lot of anglers today and have their advantages. Each manufacturer has their own terminology or name for them. However, these were not the best for various water types, so the MOW tip was evolved. A MOW (Mike McCune, Scott O’Donnell, and Ed Ward) tip is the same length, but it has a section of the floating line integrated to the sink tip. For instance, a 2.5ft floating then 7.5ft sinking, 5ft float and 5ft sink and 7.5ft floating to 2.5ft sinking.

These were revolutionary and the fact that by just changing tips you could fish anything a river could throw at you such as; deep pools, pocket water, runs, and riffles with the same line. Technology changed and fishermen wanted more the iMOW was created, it has the same sinking rate within the series, except instead of a floating section it was an intermediate line attached to the sinking section again even more versatility.  Other manufacturers have made their own versions of these tips and they work similarly or better depending on who you ask. OPST has a series called “riffle run and bucket” (which have dual-density sinking lines built in S3/S4) and Air Flo has their Flo tips.

Each tip has the desired sink rate and they weigh different, so it is important to match the right type, the right rod, weight line.

Versa Leaders vs Poly Leaders

Tips for Scandi lines are more manageable and mendable on the water, as they’re lighter and can’t throw as large of a fly. And the solution is poly leaders or versa leaders in various sink rates. A poly/versa leader is a tapered mono leader with tungsten material coating, it does have various sink rates, but it is tapered to assist the Scandi head in turning flies and leaders over.

The Casting

Casting Spey lines is a little different than casting overhead, there are some similarities but certainly far more differences.

First, let’s look at what makes a Spey cast. In a river, after swinging the fly we need a way to move the line 180 degrees of where you want the fly to land and we need a backcast area. Enter the “D” loop and then the forward cast. There are a variety of ways to do this and there are so many videos out there to demonstrate this.

If you are just starting out, its similar to a roll cast, so if you can do that, it’s a good foundation to start with. If you’re starting out a Skagit head with a few tips and watching a few videos should do the trick while learning. Or, better yet, take some lessons, or hire a guide to shorten your learning curve. Those folks could use some help in times like these.

The names of the casts, Perry poke, Snake Roll, Double Spey, Single Spey, Snap “T”, or the Circle “C” all enable and angler to move the line in 180 degrees of where you want to cast. All casts use different techniques to do this with different factors. But, they all have one thing in common, the back cast or the “D” loop and the forward cast.

It’s easier to watch it than describe in words for sure. Here are some tips. Keep your hands in the box and take your time, keep it slow. Learn one or two casts and practice them until you’re comfortable, then add another, continuing one at a time, as you master the basics.

Some of the best teachers of the sport listed below to help aide the casting. Also, check out “Skagit Revolutions” by Tom Larimer and Rio’s Modern Spey Casting. It has the veritable who’s who of Spey casting instructors, featuring the likes of Simon Gawesworth, George Cook, Dana Sturn, Mike McCune, Ed Ward, and Scott O’Donnell.

For Those Diving Deep into the Spey Game, Check Out These Resources: 

Line Speed Jedi’s YouTube Channel

Rio & Simon Gawesworth’s Spey TV 

Olympic Penninsula Skagit Tactics’ YouTube

Spey fishing has a few more parts and terminology compared to single hand fishing, however, it gives you more options and more ways to fish various flies with just one rod. Whether you fish it single hand or with two it has its advantages and opens up areas that were unfishable with traditional casting. It gives you a new tool in the tool-box, so when you see or know that a large fish is hiding in an area that you couldn’t fish previously you have the knowledge to get the chance of landing it. You learned the technique and when you finally hook up with that fish of a lifetime you know it was all worth it.

One Year Ago Today: Surviving Dorian

0

“By the time I had left Abaco, I’d stopped taking pictures of fish and started taking pictures of people.”

2019 was a weird year for me. In mid-December 2018, I’d lost what I had thought to be my dream job in the fly fishing industry. The event was a pretty crushing blow to my mental health. I had just started with the company earlier that year and was finally feeling like I had things under control. But come December, my apartment was packed up and I was heading back home to Pennsylvania thinking that I was on my way out of the industry I was so determined to make an impact in.

Then, fast forward to March 2019, when I got a call from my friend Alex.

“Hey, buddy, what do you have planned for August?”

“Nothing much” I replied, “Probably just messing around here in Pennsylvania.”

“Well, how would you like to be the summer caretaker at the Delphi Club in Abaco?”, he inquired.

My heart leapt like a hooked tarpon. I made my first trip to the Bahamas the summer after my junior year at Pitt. Since then, the warm flats of the Caribbean haunted my daily thoughts and nightly dreams.

“Hell yeah, I’m in,” I said within a millisecond of Alex punctuating his sentence.

Five months later, I found myself wheels up out of Newark, finally headed to my temporary island home. I arrived just as the current lodge manager, Max, headed off on his annual 6 weeks of vacation. His partner and co-manager, Nicole, introduced me to my new best friend, the lodge dog, Bear, and showed me the ropes of running the operation. Over the next 40 days and 40 nights, I would get to know the island more intimately and viscerally than I would have ever thought.

Over the next 3 weeks, I had the privilege to explore every inch of the southern Abaco flats chasing just about every species that swims there. Bonefish, Barracuda, Tarpon, Triggerfish, and Jacks were abundant, and as each day passed, I felt more and more like I was truly in paradise. This was all until I read an NHC alert about a likely cyclone development in the Atlantic. Over the next few days, the symbol on the NHC page turned from a number four into a named storm, Dorian.

A Bonefish landed in the early waves of storms ahead of Hurricane Dorian’s arrival.

As the storm drew closer, the staff began preparing the property for the coming onslaught. Storm shutters were installed, the generator tank filled, and all eyes were glued to the Weather Channel. It was during this time that I got to know the staff more intimately, and we began to feel like a team fortifying our positions against the near 200mph winds that the Category 5 hurricane would bring. 

Dorian seemed to be taking its sweet time getting to Abaco as it soaked up all the moisture it could off the Lesser Antilles and Puerto Rico. Eventually, it rounded the corner past Puerto Rico as a hurricane, and set its eye on Abaco. Each NHC bulletin only reinforced our fears as the storm seemed to slow down on approach. I sat glued to the TV, unable to focus on much beyond what we needed to do to get ready for the storm.

The crew introduced me to the proper ways of playing dominoes prior to the storm’s arrival.

As Dorian loomed just over the Eastern horizon, we made the call that the staff’s families should join us at the lodge. Delphi sits 70 feet above the sea and is farther south than the storm’s forecasted path over Marsh Harbour where they all lived in a settlement called “the Mud”. Within days, our team grew from a handful of staff to a big family including kids as young as 3 months.

Over the next few days, I got to know our team in ways I had never anticipated. I learned how to play dominoes as we sat on the balcony killing time, waiting to say good night, and ride out the worst Dorian would throw at us in our rooms. As night fell, the winds picked up and so did our fears. This was to be one of the strongest storms on record, and we knew we were in for something big. As the winds hit their apex, we all tried to get as much sleep as possible so we could be ready for whatever the morning held.

The view from Delphi’s balcony the morning after Dorian passed.

I awoke to the sound of knocks on my room’s door. Anticipating the worst, I got dressed and put boots on only to find Smithy – the team lead – with a hot plate of food and coffee. We took a walk around the lodge assessing the damage. To our elation, the lodge survived with only some torn fencing and a lost gutter. Delphi stood, and somehow so did our cell signals. As we would come to find out, Marsh Harbour was not so lucky. 

After making sure all of our team was okay at the lodge, our thoughts turned to Marsh Harbor and the need to check on the staff’s loved ones and homes. This journey – usually just a 20-minute drive – would take 3 days to come to fruition as the 24-foot high storm surge waters rescinded from the roads. In the meantime, we did our best to find diesel for the generators and the trucks we’d need to recover what we could from the wreckage of Marsh Harbour.

Flood waters were no match for our Toyota Hilux

Two anxious nights later, we got word that we’d be able to make it north to town through the receding waters. We plunged the Delphi Hilux through water up to its door handles, and after 2 hours, the crew and I pushed into the ruins of Marsh Harbour. The town was in shambles and so were our spirits. It became immediately clear that it was going to be a mournful afternoon. The staff’s homes were leveled, but luckily we were able to find the majority of their friends and families, scraped up but doing alright at the Government building. Over the remainder of the day, we wandered the flooded streets as bodies were recovered and the US Coast Guard helicopters circled overhead. I had never seen such devastation in person. We loaded the bed of the truck up with the team’s recovered belongings and headed back through the floodwaters to our home. 

The wreckage of staff’s homes in the Mud near Marsh Harbor.

Stuck together on the lodge grounds, I bonded with the staff as we worked to find more diesel and food to sustain ourselves. The team made several more trips north while I stayed at the lodge, working with the crew to clean up Dorian’s damage and keeping our stateside team informed of our status. I received word that the lodge manager, Max, had secured a flight in and would be arriving on the island to relieve me and take a more seasoned lead, making sure the lodge and staff were properly taken care of. Max arrived the next day with a giant bag of Dunkin Donuts and other relief supplies for the team.

Refugees took shelter in the Government buildings that were on far higher ground than Marsh Harbor

The next day we drove to the airstrip to help unload relief supplies being flown in by NGOs and private pilots and to hopefully find a ride home for me. After helping unload medical supplies, I got up the nerve to ask a pilot if I could get a ride back to the USA. We loaded up the plane, including a family of new refugees, and took off. As our wheels lifted up, a sense of relief and guilt washed over me. I knew that I was lucky to get out, but I feared for the well being of the island and the people that now held such a special place in my heart.

Young boy bikes home through the floodwaters in Marsh Harbor, Abaco

As the weeks passed, dozens of fundraisers popped up to help the island recover, and millions were raised. The island was worlds away from being anywhere close to recovery, and the road to complete restoration is going to be a long one, especially with the outbreak of COVID-19 and increasing restrictions on travel. But there is light at the end of the tunnel, albeit miles long. The Bahamas have recently announced that they will be attempting to reopen in early October. With 60% of the island nation’s GDP being tourism-based, the best thing we as anglers can do is travel back as soon as possible. I know I will be.

Scott Fly Rods Releases New Flagship Trout Rod: The CENTRIC

1

FRESH, FAST, AND UNFILTERED, the new Centric Fly Rod is set to replace the ever so sought after and loved Radian Fly Rod. If the Centric is anything like the Radian it is sure to be one sweet all-around trout rod. Scott Fly Rods is one of the few fly rod companies these days that doesn’t come out with new models of rods each year so the release of the Centric Fly Rod is big news for the Colorado based rod company. Priced at $895.00 the new Centric will be a premium all-around fly rod. We can’t wait to get our hands on this rod.

Centric Models

From Scott Fly Rods, “Cutting edge Centric series fly rods deliver new levels of stability, recovery speed, and range while giving anglers tons of feedback through the easy flexing tip sections and highly transmissive blanks.

These are the most efficient rods Scott has ever created. High line speed, flat, stable loops are easily generated at any distance with minimal effort from the caster.

Apparent to anglers of any skill level, these rods feel very light in the hand, are insanely accurate, and are simply a joy to fish at any distance.

Ease of roll casts and mends is next level. The ability to control loop shape and line speed at any distance give anglers wide ranging versatility.

Centric rods combine new tapers and multi-modulus lay ups with a new resin system to increase fiber density and reduce weight, and they feature our new generation ARC reinforcement for greater stability along multiple axes. New custom rolling equipment allows us to control fiber placement and density with new levels of precision.

And just to top it all off, we designed new standard-setting componentry for Centric rods that redefine functionality, durability, and beauty.

Scott Centric rods are fit with Flor grade cork, new titanium stripping guides with super slick zirconia inserts, new low glare Snakebrand Universal snake guides, and a new fully milled reel seat featuring speed threads, easy grip knurling, self-indexing hoods, micarta inserts, a special Delrin lock washer, and type 3 flat black hard coat.”

To learn more about the Centric Rod or locate your local dealer visit Scott online here.

The South Island of New Zealand Never Disappoints

Backcountry Fly Fishing Gear Guide

How to Tie: The Two Bit Hooker

1

In this week’s How to Tie video feature, AvidMax is here to show us how to tie the Two Bit Hooker.

Learn About This Fly:

This iconic fly, invented by Charlie Craven of Charlies Fly Box, has been a staple to any angler that values getting their flies down fast. As fun as it is to tie as it is to fish, this fly’s uniqueness was inspired by necessity and allows for tyers and anglers alike to explore new ways to construct effective flies without sacrificing looks or functionality.

The unique appeal of this fly is the double bead construction that takes the place of the traditional lead wrap, which would commonly be used to weigh down the nymph. By using this “2-bit” construction, this fly can carry more weight over a smaller surface area, thus allowing for a faster sink without sacrificing the desired taper of the body. As the final additions are made to the fly, the bead begins to disappear under the dibbing + feather wing case. The end result is a traditional-looking jig nymph that harbors a deadly secret underneath its fixings.

The reason this fly is most commonly tied with a purple color scheme is to utilize the effects the color purple presents underwater. To the angler, the fly may look out of place, understanding that there are few insects in a trout’s diet that would be that shade of purple, however, to a fish, it looks much different. The purple coloring will actually show as black, except unlike flies actually tied with black materials, the purple will offer a much more pronounced outline (especially in murky water). This allows for the fly to become much more noticeable to prowling fish, greatly increasing your chance of enticing an eat. However, in the end, it’s all about creativity and we encourage you to tie these flies in whatever color you find works best!

Ingredients:

  • Hook – Tiemco 403 BLJ
  • Beads – Hareline Slotted Tungsten Purple + Countersunk Black
  • Thread – Main: UTC 70 Denier Purple + Rib: Veevus 6/0 White
  • Tail and Legs – Hen Back Black
  • Flashback – Pearlescent Flat Tinsel Wide
  • UV Finish – Solarez Thin Formula

Now you know how to tie the Two Bit Hooker

Video and Ingredients courtesy of AVIDMAX

How to Tie: The Iron Lotus

How to Tie: The “20 Incher” Stonefly

How to Tie: Crane Fly Larva