Home Blog Page 268

5 Tips: Fishing in Fortnite

0

I know that you are thinking, this is a cringeworthy read compared to your normal flylords features… That being said, it was a long, relaxing weekend, filled with some beer drinking, and fortnight playing. After a stressful few months sometimes it’s nice to just “Veg” on the couch and do nothing. After about hour 5 of playing fortnite, I had an “A-ha” moment and decided this article needed to be written.

The following are some pointers for fishing in Fortnite!

  1. Location Location Location:
    No this isn’t a real estate lesson, but let’s just make this clear, after jumping off the boat (sorry my Fortnite lingo is probably pretty poor) you want to send it to some of the fishiest spots on the map. Towns near bodies of water, or islands surrounded by water. As you get closer to landing you can even see fish jumping out of the water. Fishing locations appear randomly throughout any body of water on the Fortnite map But make sure you are aiming to land near water.

    jpg.jpg
    Image courtesy of eurogamer
  2. Find a fishing rod – or even better a Harpoon
    Fishing rods are scattered throughout the map, you can find them in chests, or in barrels on the side of the water. If you are landing near water, it usually won’t take long to find a rod. In a recent update, Harpoons showed up! And they are badass – not only can you deal a straight 70 damage to your opponent, but you can also fish extremely fast and efficiently. I’ll almost always keep a harpoon in my arsenal, you will read below why we love fishing so much.
    fortnite-find-fishing-rods.jpg
  3. Fishing Efficiently
    Like any fishing trip, you want to spend time fishing in areas that will produce the most fish. One technique here is to grab a rod, and a boat, and head upriver. Jumping out of the boat every time you see a jumping pool of fish. You can also run along the river bank targeting jumping pools of fish. Aim for the center of the pool and the second you feel your controller vibrate pull back!
    70.jpg
  4. Optimize your backpack for fishing
    There are a few things you can almost always count on when fishing. A health fish, some ammo and a weapon. The health fish are awesome to keep in your backpack – and so are the rare shield fish. If you can stack these in your backpack you are good to go – they provide health and shield much faster than any other healing device in the game. If you stick with it, sometimes fishing can mean landing legendary weapons aswell – almost more frequently than chests…
  5. Keep your head up and keep moving
    As you already know, constant motion is important in the game, especially with the amount of sniping going on. So keep moving as you are fishing! Don’t be afraid to do some practice casting to make sure you are efficient on the water!

Cover image courtesy of the legendary streamer “Jelly” checkout his fishing challenge video below:

A few other videos we like also!

Mayfly Outdoors Acquires Airflo Fly Fishing

0

Mayfly Outdoors, the parent company of Abel Reels and Ross Reels, just finished up a deal finalizing the acquisition of Air Flo Fly Fishing Tackle, manufacturer of Air Flo Fly Lines. Airflo is a U.K.-based fly line manufacturer founded in 1978. The company is well-respected for its PVC-free fly line, which is both environmentally sustainable and recyclable. Airflo is also a leader in fly line technology, including industry-standard welded loops and tungsten line materials.

From Mayfly Outdoors:

Mayfly Outdoors, the award-winning manufacturer of premium fly-fishing products, announced today that it completed its acquisition of international fly line manufacturer, Airflo.

Founded in 2012, Mayfly is best known for operating fly fishing brands Abel® and Ross Reels®. Airflo is a U.K.-based fly line manufacturer founded in 1978. The company is well-respected for its PVC-free fly line, which is both environmentally sustainable and recyclable. Airflo is also a leader in fly line technology, including industry-standard welded loops and tungsten line materials.

“Working with like-minded people who are dedicated to the industry bodes well for the long term future of all the brands,” said Gareth Jones, Director of Sales for Airflo. “We are incredibly excited about the opportunities presented by this partnership.”

The Airflo business currently staffs several world-class anglers, along with expertise in thermoplastic engineering, “making the company one of the most unique in the industry,” said Craig Baker, Mayfly Outdoors VP of Business Development. “We are very impressed by the Airflo team because they bring high-level technical knowledge of fly lines and manufacturing. The business complements our
current brands well.”

Mayfly will now employ over 100 people across several facilities operating in California, Colorado, and the United Kingdom. The company will continue to be headquartered in Montrose, Colorado. The acquisition provides the opportunity to restructure internal operations and distribution networks. “Our goal will be to give customers the best products available,” added Baker.

The acquisition will allow both the Abel and Ross Reels brands to have a stronger presence in several key markets across Europe while giving Airflo a centralized location in the leading fly fishing market in the world, the Rocky Mountain region.

About Mayfly Outdoors: Mayfly Outdoors is a Certified B® Corporation and Colorado-based outdoor products company founded. Mayfly subsidiaries operate under various brand names including Abel®, Ross Reels® and Airflo®. Combined, these businesses are the recipients of more industry “Awards in Excellence” for innovation, dependability and performance than any other fly-fishing tackle manufacturers in the world.
Mayfly recently moved into its new 41,000-sq.-ft. facility and committed heavily to conservation efforts. In
December 2018, Mayfly proudly donated more than $800,000 to the local Montrose community, helping preserve nearly 1.5 miles of key riverfront land encompassing approximately 1.8 million square feet of wildlife and fish habitat. More information can be found at mayflyoutdoors.com

About Airflo Fishing Products: Airflo manufactures a complete range of specialist fly lines and Polyleaders utilizing proprietary PU technology. Seen as one of the most innovative companies in the fly fishing industry, Airflo has many fly line firsts, including the use of tungsten, low stretch cores and are the pioneers of welded loops. More information can be found at airflofishing.com

ALS SUCKS

Dear friends, I hope this message finds you well wherever you maybe today. Three years ago I reached out on behalf of my friend Chad Kendrick, at the time, he just became a new father and was an able-bodied lifelong outdoor enthusiast and environmental advocate. In other words, ONE OF US. Since that time, his disease has stripped just about everything away. He never once has been able to hold his son, River. He can’t enjoy simple pleasures or our wild places anymore as ALS has claimed all of his mobility. It is now starting to take his breathing and ability to eat.
I’m calling on our community once again, PLEASE click the link below to help Chad get one more round of Stem Cells. His family, his son River, deserves a bit more time with him. This may not save his life, but it will prolong it just a little while. A good human like Chad is beneficial for us all to have on this Earth. Anything helps and thank you.
Chad and I have been through a lot together and have enjoyed many adventures in which I am grateful. I am a better man because of his friendship and I wouldn’t ask such a favor if he didn’t mean the world to me.
Chad is a man of humble origins and doesn’t like to ask for help, so on behalf of this good man and his loving family, I appreciate you helping one of our own. Thanks so very much. #SaveChad
From fellow friend and angler, Andy Best.

https://theflylords.com/2019/09/30/disabled-veteran-ties-1000-purple-heart-flies-to-honor-wounded-veterans/

Pennsylvania to Double Trophy Trout Stocking

0

Pennsylvania has always been an epicenter for trout stocking for decades, and the state is among one of the US’s heaviest trout stockers, which has made it a hotbed for anglers looking to catch easy trout, and conservationists urging the state to adopt new trout management practices. PA is home to the second most trout water in the country behind Alaska.

From PennLive.com:

“Brood trout – those that have been kept at commission hatcheries an extra year or two as the source of eggs for the commission’s ongoing trout rearing and stocking program – will jump from about 27,000 this year to about 60,000 next year.

Trophy golden rainbow trout, each also 2-3 years old, will increase from 9,500 this year to 13,000 next year.”

To many anglers, this is awesome news, bigger fish that are easier to spot and fool, sign us up! But, stocking large fish can be an absolute detriment to the wild trout and native fish that inhabit those waters. Because of their size and tendency to be more aggressive, stocked fish quickly out-compete smaller wild fish.

To all those venturing into the Keystone State in the next year, we wish you good luck, whether you’re chasing stocked fish, or pushing into the Pennsylvania wilderness on the hunt for wild fish!

Video of the Week: Indiana Bones

In our latest video of the week, we take a look at a new film by Todd Moen showcasing some amazing fishing opportunities in the Bahamas. We are able to see a unique way of approaching these fish on paddle-board and foot, as well as some amazing scenery and wildlife.

The crystal clear water of the Bahamas offers some amazing sight fishing opportunities to fish cruising the white shallow flats. Legendary angler Brian O’Keefe takes his time wading these flats and is able to come into contact with some bonefish in the process. Check out the full film to see the result!

This film was created by Todd Moen. Be sure to check out more of his films on the CatchMagazine YouTube page.

The video of the week is selected and written by FlyLords team member Conner Grimes (@doublehaulfishing).

8-Year-Old Smashes Idaho State C&R Rainbow Trout Record

0

Featured image from Idaho Fish & Game

Over the weekend, Sophie Egizi and her family were out fishing for rainbow and bull trout on Lake Pend Oreille in Idaho, when something truly large grabbed the fly at the end of her line. She had managed to hook a 36.5 inch Gerrard Rainbow Trout and fought it hard to the surface.

“Congratulations to Sophie Egizi on setting a new catch-and-release record Gerrard rainbow trout!” said the Idaho Department of Fish and Game. “The 8-year-old angler wrangled up the 36.5-inch monster while trolling flies on Idaho’s famous Lake Pend Oreille in early October.”

A Gerrard rainbow trout, known to be the largest sub-species of rainbow trout native to the West Kootenay region that extends south into Northern Idaho. Lake Pend Oreille is no stranger to state record fish, holding both the weight record for Rainbow trout (36 lbs) and the catch-and-release state record for Bull Trout, currently held by Aaron Fox at 29.5 inches.

If you need us, we’ll be looking at dates to get ourselves up there to do battle with those beautiful, native fish!

Source: NBC Montana

Are Striped Bass Doomed? Maybe

Well the Atlantic States Marine Fisheries Commission (ASMFC) is at again. They are refusing to recover and rebuild the striped bass stock. Yes, you probably should have come to expect this at this point. ASMFC spent the last couple of months reviewing hundreds of public comments and conducting hearings on the proposed actions to reduce striped bass mortality by 18 percent. Overall, there was encouraging public support for reversing the ongoing trends in the striped bass stock.

Leading up to the October 30th meeting, I was optimistic. Many of the hearings were widely attended; people I wouldn’t have expected to get involved were submitting comments advocating for conservation; and, during my local meeting, the ASMFC official told me the clear majority of comments were in support of equal reductions through one ocean striped bass at 35″ and one Chesapeake Bay striped bass at 18″.

These indicators all pointed to a realistic possibility of recovering the striped bass stock in the timeliest manner given the set of available options ASMFC developed. A coast-wide implementation one striper at 35″ appeared to be the most rational because it was previously used to recover striped bass after the near collapse in the 1908’s. And the 35″ option received 72 percent of the support for the equal reduction sub options.

From ASMFC

However, with this information, the Board approved Option 2 and sub-option 2-A2, one fish at 28″-35″ slot. This sub-option received 17 percent of support.

There are two important caveats to the Board’s decision to implement a slot limit to achieve a 18 percent coast wide reduction in striped bass mortality. First, the public overwhelmingly wanted something else. Public support is an essential component to successful conservation–this goes without saying. Second, the possibly of the slot limit working is widely up for debate–even with a 7″ slot, which should include several year classes. Striped bass are overfished and overfishing is occurring. The overfishing portion of that sentence is important because it denotes the population structure–the female spawning biomass–is out of whack.

Amendment 6 requires the stock to be rebuilt (i.e. the age structure and spawning biomass) based on this scenario, but I do not see how a slot will efficiently recover and rebuild the stock. Sure, if the stock’s age structure was well-distributed and we had a healthy spawning biomass, then sure a slot limit would work.

But today we don’t have this, so the slot will put intensified pressures on several year classes. In turn, this may lessen the probability of meeting long-term rebuilding goals. Regardless, I would be thrilled to see this decision prove successful.

What was once the norm, courtesy of @NorthBarMedia

There were a couple of beneficial decisions to come out the ASMFC meeting. The Board voted to mandate circle hooks for all bait fishing. This is a very commendable and common-sense action by Board that will help decrease release mortality–kudos. And, the Board voted to find Virginia out of compliance for its Chesapeake Bay menhaden reduction fishery. This is a complex topic, but essentially now the Secretary of Commerce (who may be napping) will decide whether to impose a federal moratorium on the fishery. Omega Protein–the only company participating in this fishery–should not be allowed to willingly exploit menhaden, which is an immensely important species in the Bay’s food chain.

There is a lot to take in from this meeting and, in the end, none of it may matter due to conservation equivalency. But it is important to remember that–to a degree–these liberal (not in the political sense) reductions can be unimportant. If recreational fishermen fully understand that they are killing too many striped bass and correct that, then striped bass can be saved. But, as great as that would be, it is a pipe dream.

Photo courtesy of @NorthBarMedia

https://theflylords.com/2019/09/09/striped-bass-draft-addendum-will-it-save-the-stock/

https://theflylords.com/2019/11/05/call-to-action-tongass-natl-forest-faces-threat-of-roadless-rule-repeal/


This article was written by Flylords’ Conservation Editor, Will Poston.

Five Quick Tips for Photographing Fall Colors

Tip 1. Plan

Peak Fall colors happen at all different times depending on the location. Just because peak occurs mid-October, where you live, doesn’t mean it’s going to happen at the same time where you’re going! And if you’ve only got a four or five day window on your trip, you better do some research. The Canadian Rockies might peak in late September, Vermont early to mid October, and Virginia and Tennessee not until the end of October or even into November.

Tip 2. Don’t Plan

Ok, I know I just told you to plan, but that’s because a certain amount of preparation is inevitable. But once you have your general timing down, and area is chosen, it can be helpful to not stick to a precise plan. Even within a general area, you can have patches of color at various levels of peak. It’s better to be flexible and go where the color is, even if it means skipping a spot that you had your heart set on, but the colors are muted and dull. Fall is all about capturing the colors!

Tip 3. Be Determined

If you arrive at your favorite waterfall, only to find out that the storm the night before blew off all the leaves, deal with it. Forget the waterfall, and look for those spots with color left. Maybe you have to adjust and take some trail shots, or creek shots where the banks are covered in fallen leaves. Don’t give up just because your pre-determined composition didn’t work out.

Tip 4. Embrace Bad Weather

Non-perfect weather makes for much better photos! Embrace it, grab your rain gear and go! There’s nothing better than bright yellow and orange leaves against a backdrop of near white fog! And the dampness on the ground or road just adds dimension and interest.

Tip 5. Perfect the Edit

Don’t be afraid to experiment with your editing style. Obviously, you want the yellows and oranges and reds to pop! But don’t go overboard. You want the final picture to be something that is believable and close to what you were seeing with your eyes. A favorite trick of mine is to NOT over saturate the fall colors, but instead play around with the Luminance sliders to brighten and pop the right colors without over-saturating them.

Most importantly, just get out there and shoot! No amount of tips or youtube videos can replace experience in the field!

Article and photos from Kenton Steryous, a professional photographer based in Roanoke, Virginia. You can check him out online at www.kentonsteryous.com or on Instagram @kenton_steryous.

https://theflylords.com/2019/11/01/a-story-best-told-in-the-dark/

https://theflylords.com/2018/04/16/underwater-photography-tips/

Pittsburgh Man Flips Car on Highway, Walks Away, Says He’s Going Fishing

0

Pittsburgh, PA

On the morning of Monday, November 4th, drivers on Route 28 in Southwestern PA, witnessed a bizarre event. A man driving lost control of his car, which overturned and slid into the guardrail. Now to most of us, this would be a jarring experience. However, the man in the car had other plans for his day, and no amount of bodily or vehicular damage would stop him…he was headed to the river.

As the rescue crew and ambulance arrived, the man, who was shaken but not harmed, told the responders that he was going fishing. So he picked up his rod and tackle box and started walking down the road, and only had time to tell the ambulance driver that he was going fishing.

According to WTAE Pittsburgh, “At last check, officials had not caught up with the man.”

This dude is essentially the Jason Bourne of fisherman, he brushed off the accident like he had planned on it happening, and walked off into the distance to complete his fishing mission.

Source: WTAE Pittsburgh

How to Tie: The Mop Fly

0

In this week’s How to Tie video feature, Tim Cammisa from Trout and Feather shows us how to tie the mop fly.

Learn about this fly

Difficulty: Novice

The mop fly has been one of the most controversial flies that has hit the water since the squirmy wormy. Some traditionalists may scoff at the thought of even considering this Frankennymph a “fly”, while other more open-minded anglers may believe it’s a gift from the heavens. No matter your personal position, there is one thing everyone can be sure of…this fly catches fish.

Often times considered a cousin of the PA born Green Weenie fly, the Mop Fly capitalizes on its fluorescent green body and its notable ability to wriggle underwater. When fished, this fly presents itself as some sort of larvae similar to the crane fly, and acts as a perfect attractor to stubborn trout. Anglers have shared stories of not seeing a fish all day, then switching flies to quickly find trout literally fighting over their fluorescent droppers.

As Tim remarks, this fly is an easy 2-minute tie. Due to their simple construction, and minimal steps, any tier can knock out an entire batch of these flies within 20 minutes. One thing to note is that when looking for the “mop” part of the fly, instead of waiting for a delivery in the mail, take a quick trip to your local hardware/ cleaning supplies store and look for mop materials. There, you’re sure to find the perfect body materials for an extremely fair price.

Ingredients:

  • Hanak H 450 BL; sizes 10-12
  • Silver tungsten; 3.5 mm
  • .010 lead free wire
  • 6/0 UNI; chartreuse tying thread
  • Body: Mop material
  • Siman Peacock Dubbing; Peacock Black

Now you know how to tie the Mop Fly!

Video and Ingredients courtesy of Tim Cammisa

Article written by Flylords team member Wills Donaldson 

https://theflylords.com/2019/10/01/how-to-tie-crane-fly-larva/

https://theflylords.com/2019/08/13/how-to-tie-green-caddis-larva/

https://theflylords.com/2019/10/29/how-to-tie-the-egg-sucking-leech/