Home Blog Page 160

Organization of the Month: Atlantic Salmon Federation

For this installment of Organization of the Month, we sat down with the Atlantic Salmon Federation (ASF) to learn about this misunderstood fish and the efforts to recover them. Atlantic salmon once had strong populations as far South as Connecticut and even New Jersey, but overfishing and habitat destruction decimated populations. Today, rivers in Maine and parts of Canada support many distinct populations of Atlantic salmon, but their populations all are declining and a fraction of historical levels. Follow along to learn more about this fish and ASF’s work!


Flylords: How did ASF start? Was there an event or anything that precipitated ASF’s inception?

ASF: ASF and its predecessors have been leading wild salmon conservation efforts in Eastern North American for over 70 years. The Atlantic Salmon Association (ASA) was formed in 1948, and in 1981 the ASA merged with the International Atlantic Salmon Foundation to form what is now the Atlantic Salmon Federation.

The impacts of commercial fisheries as well as the effects of DDT spraying were galvanizing issues in the early days. Our magazine, the Atlantic Salmon Journal, published its first issue in 1952. Today, ASF oversees a network of seven state and provincial councils, as well as 103 affiliated groups. In all, we represent about 25,000 members and volunteers.

In short, we’re a major conservation organization, and we’ve been in the game for a long time. That said, I think the broader fly-fishing community is perhaps unaware of our work. We really appreciate the opportunity to tell our story to the Flylords audience.

Historic Signing of 12 Year Greenland Agreement: Bill Taylor, President ASF, Henrik Sandgreen, Chair KNAPK, Fridleifur Gudmundsson, Chair NASF Iceland, Elvar Frifriksson, NASF Iceland

Flylords: What is the primary goal or mission of ASF?

ASF: Simply put, we’re all about restoring Atlantic salmon populations to their historic abundance. But it’s not just about numbers; ASF’s mission is wild fish in wild rivers. That means self-sustaining populations in healthy ecosystems.

Atlantic salmon are wide-ranging fish, with a complex life cycle. Like Pacific salmon, they’re born in rivers where they grow for several years before migrating to the ocean. Atlantic salmon feed primarily in the waters off Greenland, then make the journey back to their natal rivers to spawn. It’s a 2500+ mile round trip. Unlike Pacific salmon, Atlantic salmon will often survive to spawn a second or even third time.

It’s an incredible journey they make, but today they face threats throughout their whole life cycle in freshwater and marine environments. ASF is working to protect them at every step along the way.

Flylords: On that note, how does ASF work to achieve that?

ASF: Our work falls into three principal categories: science, restoration, and advocacy.

ASF has a team of world-class scientists who do some really stellar research. One of their most interesting projects is tracking wild Atlantic salmon at sea. That means capturing and tagging fish as they’re leaving rivers (either for the first time as smolt, or as adults after spawning) then following them with acoustic and satellite technology. We’re learning why more salmon than ever are dying at sea, and what can be done about it.

I love talking about our restoration work because there are some truly inspiring success stories. In Maine, for instance, we’ve worked with partners to remove several dams, opening passage to many species of migratory fish—not just Atlantic salmon. With access to important spawning grounds, Atlantic salmon are making a comeback in Maine. Returns on the Penobscot River in Maine last year were the strongest in a decade.

North of the border in Canada, we’re engaged in projects to improve habitat, especially where human activities have degraded the temperature and flow of rivers. Again, many species benefit from this work.

Our advocacy work is broad and far-reaching. We campaign against the expansion of open net-pen salmon aquaculture. Readers may know how bad that industry is for Pacific salmon, and it’s even worse for Atlantic salmon because aquaculture escapees interbreed with wild fish, reducing population size and adding domestic genes to wild populations. We advocate for better land-use where industries like forestry and mining can have negative impacts on freshwater ecosystems. And we also work toward sustainable fisheries management, which I’ll get to in more detail down below.

Rocky brook smoltwheel chafe

Flylords: I think that Atlantic salmon often tend to be shadowed by their Pacific ‘cousins’. Most don’t know the extent to which Atlantic salmon inhabited much of the United States’ east coast. Can you briefly touch on the history of Atlantic salmon and what contributed to the population collapses?

ASF: That’s a fantastic question. I feel like the epic story of Pacific salmon—their migration, spawning, and the marine-derived nutrients they bring to freshwater ecosystems—is a familiar one. But Atlantic salmon played much the same role on the east coast. There is some evidence that the historical range of Atlantic salmon extended as far south as New Jersey, and we can say for certain that they were present in Connecticut’s Housatonic River.

Along with other migratory fishes like sea lamprey, shad, and river herring, Atlantic salmon played a key role in the ecosystems of Atlantic rivers. But then humans came along. We dammed rivers, destroyed habitat, and fished salmon to near extinction. Today, a few rivers in Maine are the only strongholds for Atlantic salmon in the United States.

Flylords: Domestic fisheries are hard enough to manage and advocate for, can you speak to the international fishery management framework for Atlantic salmon?

ASF: There are no fisheries currently for Atlantic Salmon in the United States because they are listed on the Endangered Species Act. In Canada there are active recreational and Indigenous fisheries in Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland and Labrador.

There is one remaining commercial fishery for Atlantic salmon of North American origin in the world – off the coast of Greenland where Atlantic Salmon from more than 2,000 rivers around the North Atlantic go to feed. Although that fishery is very small compared to what it used to be, the best scientific advice says there is not enough fish in the sea to support it.

However, science always must be balanced with people, and Greenlanders have a right to fish in their home waters, no matter where the salmon come from, so in 2018 we partnered with the North Atlantic Salmon Fund in Iceland and signed a historic 12-year deal with the union representing Greenland commercial fishermen. The deal has an annual harvest target of 20 metric tons.

Through three seasons we haven’t hit that number yet, but real harvest reductions have been significant, fishery management measures are now better than Canada, and we have saved thousands of large fish, up to 50 plus pounds, giving them a chance to return to home rivers and put millions of eggs in the gravel.

On 7 Jul 2013 the Veazie Dam removal began, with a celebration held on the east side of the river.

Flylords: What is preventing Atlantic salmon recovery today? What are the primary threats?

ASF: I wish there was an easy answer to that one. Because Atlantic salmon use so many different ecosystems—from the tiny streams where eggs hatch to the North Atlantic Ocean where they feed and grow large—they face a lot of threats.

High marine mortality is affecting salmon from every river and we’re looking at some practical ways of reducing this, especially in the nearshore environment. Another big threat is open net-pen salmon aquaculture, and then in rivers we have warming waters, agriculture, development, forestry, mining, and more. It’s a lot, but we’re constructively tackling each one where and when we can and getting positive results.

Flylords: There are a bunch of really interesting scientific initiatives on your website–care to highlight a couple initiatives?

ASF: There sure are. Our Research and Environment Team is really focused on understanding why so many Atlantic salmon are dying at sea, which, of course, will help us better protect them. To that end, our scientists have undertaken some ground-breaking ocean tracking projects.

For example, they capture smolt (juvenile salmon that are leaving their natal river for the first time) and kelt (salmon that have overwintered in freshwater after spawning) and implant them with acoustic transmitters. When the fish pass by acoustic receivers in the open ocean, we get tracking data, which we can then piece together to understand how Atlantic salmon are moving around in the marine ecosystem.

Our scientists have also used satellite tracking, which is much more expensive but yields a wealth of information—fine grained data on salmon movements. Satellite tracking shows adult Atlantic salmon reaching depths of over 900m!

By correlating salmon movement with oceanographic data, we’re able to see—and predict—how salmon react to a warming ocean. That’s going to be really important in the coming years. We’re also using tracking information to learn about predators. If an acoustically tagged fish suddenly starts moving like a striped bass, or a shark, we know the salmon has probably been eaten.

Release of a pop-up satellite tagged (PSAT) salmon from West Greenland. ASF project in conjunction with NOAA.

Flylords: I’d be remiss if I did not bring up climate change. I certainly have read a lot about the acute fishery impacts of climate change on the Atlantic coast (shifting stocks). How is climate change impacting Atlantic salmon?

ASF: Ecosystems everywhere are changing, and nowhere are Atlantic salmon immune.

In the ocean, we’re seeing massive changes to the food web, and that’s effecting the ability of Atlantic salmon to feed, and also probably causing disruptions to their migration patterns.

While in freshwater, salmon need cold water and good streamflow. Rivers are being negatively affected by hot, dry summers, and those conditions put a lot of stress on salmon.

Flylords: Are there ways to combat those impacts?

ASF: Luckily, yes. One thing we can do, which gets immediate results, is improve freshwater habitat to build climate resilience. Atlantic salmon need cold-water refuges, and we can restore and enhance those for them.

In a lot of cases, rivers have suffered from log driving, damming, and other human uses. They get wide, shallow, and warm. By actually getting in there and reshaping the river, we can recreate channels, provide depth, and improve flow. It creates an instant boost in habitat and, in some cases, has resulted in ten-fold increases in observed spawning activity.

Releasing an Atlantic Salmon in the Bonaventure River

Flylords: Atlantic salmon and fly fishing are deeply intertwined. Do any fishable populations of Atlantic salmon remain? How do fly fishermen target Atlantic salmon?

ASF: People have been fly fishing for Atlantic salmon for centuries. Atlantic salmon are known as the ‘King of Fish.’ There’s a lot of proud heritage there, but at the same time, like many other recreational fisheries, ASF believes it’s important to make salmon fishing more diverse, inclusive, and accessible. We all stand to benefit from that.

Of course, these developments are possible because many there are still many fishable populations of Atlantic salmon. In Atlantic Canada and Quebec, there are hundreds of rivers that have recreational fisheries. I should say, too, that there are Atlantic salmon adventures that fit every budget, from the finest lodging to the do-it-yourself trip of a lifetime, and the entire range is incredibly easy to plan and do.

To answer your last question, the most popular way to fly fish for Atlantic salmon is on the swing. Salmon anglers use all kinds of gaudy, colourful, beautiful flies, and they have just as many explanations for why they work—or don’t. Salmon don’t actively feed when they’ve returned to rivers, so we still don’t really know why they take a fly.

Flylords: How can readers get involved and learn more about the Atlantic Salmon Federation?

ASF: The best way is to become a member! It’s not expensive, and it comes with a subscription to the Atlantic Salmon Journal, which is chock full of salmon angling and conservation stories. We also host fundraising events (virtual these days, but Covid will be over soon), which are a great way to meet other anglers and support conservation work.

If readers happen to be in Maine, Quebec, or Atlantic Canada they should absolutely reach out to one of our regional affiliates, who often provide local knowledge and even river maps. And finally, I’d really encourage readers to follow our weekly in-season blog, Rivernotes. It always has lots of updates on conservation work, and—most importantly—fishing conditions throughout salmon country.


Catching Up With Trout Unlimited: 2021

Organization Of The Month: Sportsmen For The Boundary Waters

Organization of the Month: Native Fish Society

Ecological Disaster on The Kalamazoo River

For 14 months, an unknown amount of sludge has been released into The Kalamazoo River. The spillway gates of Morrow Dam were drawn down unexpectedly in 2019 to conduct emergency repairs. The work at Morrow Dam, which was only supposed to take four months, released massive amounts of sediment and left the river ecosystem destroyed.

Swimming Pools of Sludge

Eagle Creek Reusable Energy, owner and operator of the dam, opened the gates in October 2019. The entire reservoir was drained, allowing several decades worth of sediment to be discharged into the Kalamazoo River. The company did not give Michigan EGLE (Department of Environment, Great Lakes, and Energy) timely notice of the drawdown as they are required to.

Steven K. Hamilton, Kellogg Biological Station and Michigan State University researcher, has been keeping a keen eye on the Kalamazoo River since the mid-2000s. He recently shared biological findings to the public of the total amount of sediment released from Morrow Dam. Between October 2019 until December 2020 an incredible 369,000 cubic yards of sludge was released into the river. This is equivalent to nearly 37,000 fully loaded dump trucks or 112 Olympic-sized swimming pools. The amount is over three times the 114,000 cubic yards estimate given by AECOM, the consulting company hired by Eagle Creek to assess the damage.

Ryan Baker, co-founder of the Kalamazoo River Alliance and local angler, began to see effects of the sediment flow early last spring. He stated concerns with increased turbidity and the creation of substantial mudflats.

“The deposits are over 12 feet deep in some areas…There are islands of this sediment appearing downstream from the dam with the bulk of it within the immediate ten-mile stretch after Morrow Dam.”

The sediment has been reported in Lake Allegan, 40 miles downstream from the dam.

Show progressive sediment build up on the banks of the Kalamazoo River.
Progressive sludge build-up on one bank. Each photo was taken two months apart from the other. Photo by: Ryan Baker

Permanent Ecological Damage

The sludge is currently smothering fish and wildlife habitat in the Kalamazoo River watershed. Experts are concerned this will lead to an immense loss of fish and other species, especially if dredging efforts aren’t configured soon. “It (sludge) has absolutely obliterated miles of habitat- whether that’s fish, mussels, invertebrates, aquatic insects, wild grasses, and flowers…” states Baker.

The once productive Largemouth, Smallmouth, and Carp fisheries are likely to suffer, especially after this spawning season. The immediate stretch of the Kalamazoo River below Morrow Dam relies on natural reproduction for fish populations. The majority of the historic spawning habitat (the rock and gravel beds) for these fish is now covered in over five feet of mud.

Baker also shared that while floating down the river, he can see fish tumbling with the current. “They’re belly up, barely alive. It makes me wonder how this river will look, five, ten, twenty years from now.” He also discussed the absence of turtle and muskrat sightings, which were plentiful prior to the sludge.

“It is a very serious impact that in some ways has more obvious damage to the river life than the lingering effects of the oil spill…” states Hamilton, the Kellogg Biological Station and  Michigan State University researcher.

Visual representation of the sickly fish on the Kalamazoo River.
Emaciated Bass from the Kalamazoo River. Photo by: Ryan Baker

So What Now?

As of April 20, 2021, Eagle Creek has completed one dredging operation after EGLE agency pressure, which removed 2,100 cubic yards of sludge from an oxbow section of the river near Wenke Park. The company hopes to capture more sludge from upstream once the area is cleared. Most of the sludge has already moved downstream, however. A statement has yet to be released on what will be done with the dewatered sediment.

Skinny late September Bass. Photo by: Ryan Baker

Eagle Creek Renewable Energy is currently undergoing an investigation by the State, leaving concerned community members and conservationists in the dark. Right now, it’s important to keep voicing concerns to Michigan EGLE and the DNR. Eagle Creek must be held promptly accountable. The handling of this situation will set a precedent for the next inevitable incident.

For more information about Morrow Dam, click here.

Photos courtesy of Ryan Baker from Kalamazoo River Alliance. Follow them on Instagram to stay up-to-date.

How to Tie: Graffam’s Hustler Soft Hackle Euro Nymph

In this week’s “How to Tie” video feature, Fly Fish Food gives us a great tutorial on how to tie the Graffam’s Hustler Soft Hackle Euro Nymph.

Learn About This Fly:

Difficulty: Novice

The Hustler is a Umpqua fly tied by Josh Graffam that was created to imitate most if not all mayfly nymphs. This is a very simple but effective pattern that will surely get down quickly. History proves that a simple Hare’s Ear nymph is one of the best flies for all anglers. The Hustler is basically a Hare’s Ear on steroids.

The beauty of this fly is the versatility. Depending on the water you are planning to fish, you can tie these flies as light or as heavy as you would like. This fly was originally tied using offset beads to reach maximum depths but in this case a slotted bead will work perfectly. Adding soft hackle to a typical nymph pattern can be a game changer. The soft hackle acts as a casing and accurately imitates an emerging nymph.

Typically soft hackle flies are tied with saddle hackle or other varieties of hackles. The Hustler is tied using a CDC loop. While CDC loops can be achieved without tools, having CDC clamps and loop spinners are very beneficial. CDC also adds a very life-like and natural appearance to a nymph. The fibers “flutter” in the current as the fly moves through the water column. Sulky is used for an added flashy wrap which adds a subtle yet necessary effect to the thorax of the Hustler. Sulky works very well, but thin wire wraps are also proven to be just as effective. Have fun with this fly and add your touch. Try lighter and darker hackles and various wrapping materials until you find what works for you.

Ingredients:

  • Hook: Umpqua XC400BL-BN – 14
  • Thread: Veevus Fly Tying Thread – Black – 14/0
  • Bead: Fasna Offset Tungsten Beads – 2.8 mm – Gold
  • Bead Alternate: Fulling Mill Slotted Tungsten Beads – 3.2mm – Gold
  • Tail: Whiting Coq De Leon Euro Nymph Tailing Pack – Dark Pardo
  • Body: Hareline Dubbin – Hare’s Ear
  • Body Alternate: SLF Spikey Squirrel Dubbing – Natural Fox
  • Rib: Sulky Metallic Tinsel – Opalescent
  • Collar: Fly Fish Food “Duck Butt” CDC – Dark Gray Dun
  • Collar Alternate: Nature’s Spirit CDC – Medium Slate Dun
  • Head: Ice Dub – Peacock Black

Now you know how to tie the Graffam’s Hustler Soft Hackle Euro Nymph.

Video and Ingredients courtesy of Fly Fish Food.

Monster Muskie Caught in Incredible Underwater Footage (HD)

0

This muskie will stare into your soul.

Watching Esox (Read: Pike, Pickerel, and Muskie), move and hunt underwater is a creepy experience. If you’ve ever fly-fished for them, you know the hits often come with no warning, or you’ll watch as these apex freshwater predators slowly stalk your streamer until finally lunging and t-boning your baitfish made from feathers and fur.

Watching this individual, a monster Iowa ‘ski, casually slide into this video is eerie, to say the least. Not to mention the way it looks straight into the camera lens before charging past.

3 Quick Tips to Improve Your Streamer Fishing

The beauty of fly fishing is that there is not one specific style or necessary path for catching fish. Analyzing conditions, species, and location all play factors into the style of fly fishing you plan on using. Whether that is fishing with dries, swinging wet flies, or stripping streamers, they all deserve a place in your arsenal. Today we will be focusing on streamer fishing with this tips and tricks video of the week. Matt with The Northern Angler will breakdown 3 quick tips to improve your streamer game.

Tips for Improving Streamer Fishing

Tip #1: Practice Casting, Shooting, and Managing your Line

  • Practice, Practice, Practice. That is the name of the game when it comes to casting.
    • Spend time on the water hitting specific pockets.
    • Place a hula hoop in your lawn and practice landing your flies as close to or in that area.
    • When shooting line and going right into the strip, keep the fly line positioned between your thumb and pointer finger. Think of it as you are making an “OK” sign and allow the line to stay within the circle. This will make the transition to the strip much easier.

Tip #2: Change Up your Presentation

  • Don’t limit yourself to a simple stripping motion when retrieving your fly.
  • Learn to animate a fly using your rod tip. This can be achieved using the jerk strip motion. When stripping the fly, simply jerk the rod to add animation.
  • Change up your retrieving cadence.
    • Allow for pauses in your strip as this type of action can be intriguing to fish.
  • Practice the Jig retrieve method as well.
    • Simply lift the rod tip in an upward motion when stripping your fly in.
  • Just experiment with everything, it is all guess and check when it comes to streamer fishing.

Tip #3: Learn the Strip Set

  • This is the most effective way to set the hook when streamer fishing. Your goal is to drive the hook into the mouth of the fish eating the streamer.
  • When you feel the take, pull your fly line directly backwards to secure the hookset.
  • If you perform the typical trout set, often times you will pull the fly right out of the fish’s mouth.

There you have it, streamer tactics that will surely help you during your next outing. For more tips and tricks, visit The Northern Angler’s YouTube page by clicking here.

Fly Fishing Canary Islands, Spain

I am so lucky to live in the paradise of the Canary Islands of Spain. It is located just northwest of Africa, ideal for fly fishing. We have the perfect temperature for warm water fishing and approximately 167 reservoirs or lakes to choose from.

In the reservoirs, we have a variety of carp, tilapia, perch, and black bass.

We can fish year-round for these different species of fish and there is no pressure from other anglers.
Carp is my favorite fish, they are very powerful, and huge, and sometimes difficult to catch.
The black bass is unstoppable and beautiful.
The tilapia and parasol with those colors… as I like to say, we continue enjoying!
Article and photos from Javier Toledo Martel, give him a follow at @flyfishingcanaria.

The Streams of Slovenia

How to Use the Drag & Drop Casting Technique for Carp

Orvis Announces 2021 Orvis Endorsed Award Winners

Orvis, the family-owned-and-operated outdoor retailer that specializes in fly-fishing and wing-shooting gear, dog products, and active lifestyle apparel, has recognized Alaska guide Brian Kraft and legendary Montana guide Paul Roos as the 2021 Conservationist of the Year and Lifetime Achievement Award winner, respectively. Both awards were recently delivered during the annual Orvis Guide Rendezvous, which took place virtually this year due to the COVID-19 pandemic.

Every year, the Orvis-Endorsed Awards recognize the best of the brand’s endorsed partners and designate the Fly Fishing Lodge of the Year, Wingshooting Lodge of the Year, Fly Fishing Guide of the Year, Wingshooting Guide of the Year, Outfitter of the Year, Conservationist of the Year, and recognizes the Lifetime Achievement Award recipient. The Orvis-Endorsed winners are selected based on customer feedback of the nominated lodges, guides, and outfitters, as well as the operations’ commitment to stewardship of natural resources. The awards are announced annually at the Orvis Guide Rendezvous.

“The Guide Rendezvous is one of my favorite events every year, as it brings together so many at the forefront of fly-fishing and wing-shooting world,” says Orvis President Simon Perkins. “The Orvis-Endorsed Awards and the Lifetime Achievement Award are a chance to celebrate those whose passion and commitment are pushing the sport forward – for their guests, their industry peers, the greater community, and the natural resource.”

This year, Orvis named Brian Kraft of Alaska Sportsman’s Lodge as the 2021 Conservationist of the Year in recognition of Kraft’s commitment to protecting the Bristol Bay watershed, the largest and most important salmon fishery in the world. Kraft has worked tirelessly alongside the local fishing community, the indigenous leaders of Bristol Bay, and Trout Unlimited to put a stop to the Pebble Mine project.

“From the very beginning, Brian has been in the thick of the battle, lending an endless amount of his time, energy, airplane hours, and money to stopping the Pebble Mine. Brian’s leadership, passion, generosity, commitment, and partnership with the indigenous leaders of Bristol Bay has been pivotal to keeping the Pebble Mine from being built in the heart of Bristol Bay,” says Nelli Williams, Alaska director for Trout Unlimited. “His dedication to conservation has inspired thousands of people around the country to get involved, take action, and make a difference.”

Orvis awarded its 2021 Lifetime Achievement Award to Paul Roos, a legendary angler, conservationist, and Montana-based fly fishing guide. Roos is remembered for his passion for conservation, and for creating meaningful relationships and memorable experiences on the water with clients and friends.

The 2021 Orvis-Endorsed Award winners:

Fly Fishing Lodge of the Year — Madison Valley Ranch, Montana

Wingshooting Lodge of the Year — Flying B Ranch, Idaho

Fly Fishing Guide of the Year — Alberto Rey, New York

Wingshooting Guide of the Year — Mike Goldsmith, Joshua Greek Ranch, Texas

Fly Fishing Outfitter of the Year — Lillard’s Fly Fishing Expeditions, Colorado, Wyoming, Montana, and Maine

Conservationist of the Year — Brian Kraft, Alaska Sportsman Lodge, Alaska

Lifetime Achievement Award — Paul Roos, Montana

Learn more about the 2021 Orvis-Endorsed Award Winners, here. 

American Made – An All Encompassing Look at the Scott Centric

Last September, we had a chance to get our hands on an all-new Scott Centric rod. With a trip to Alaska in the works, and an eagerness to explore the hype of the “impossible to find rod”, we did what anyone would do: tied on some flies and got on the water. Here, you’ll find our thoughts and a recap of our experiences with the rod, as well as a behind-the-scenes look into the thinking behind the Centric with Scott CEO, Jim Bartschi.

Last Fall, the fly-fishing community was turned on its head by the release of the brand new Centric rod from Scott Fly Rods. Designed and crafted in Montrose, Colorado: the Scott brand has built quite the reputation for itself when it comes to being one of the highest performing, carefully crafted fly-rods on the market. This is why, as it came with no surprise, once the new Centric rods hit the market, they were gone in a flash. The mighty cult following that has developed around the American-made rods showed their true colors, as, within a few days of release, not a single rod was available for purchase or even demo. It was at this point we knew we had to try one out for ourselves. So, with a little bit of patience, and a lot of searching, we were able to get our hands on one of the new Centrics (9″6Line). It was only after just a few casts that we realized what all the hype was really about…

Rod Specs and Performance:

Features:

To put it out in the open, we’re no rod-experts. That being said, we’ve had the pleasure of casting quite a few at this point and can clearly identify a difference between a “good” and a “less than good” rod. For those that speak the language, here are the specs. (Don’t worry everyone else, we’ll put it in laymen’s terms below)

scott fly rod

From the Centric Landing page:

  • Carbon Link: Centric rods combine new precision construction techniques with our innovative new resin system to bond carbon fibers in a very dense matrix.
  • Arc 2: Scott introduced the world to ultra-lightweight unidirectional carbon fiber reinforcements over 15 years ago. Our Advanced Reinforced Carbon (ARC) adds directional stability and hoop strength while minimizing additional weight.
  • ReAct: ReAct technology combines our X-Core design with a new complex materials and taper system to create a break-through in fast action rod design. Distance, control and accuracy are compromised by waves that vibrate in the rod, even after the cast has been made. Simply making the rod stiffer to stop these vibrations kills feel. ReAct counteracts energy sapping vibrations by speeding the recovery of the blank without the need to stiffen the rod with more material. This puts the feel in fast. And that’s a really good thing.
  • X-Core: Diameter is proportional to stiffness and strength, and X-Core, or Expanded Core, technology delivers blanks that transmit feel and maintain stability better than any other design approach. We use fast taper mandrels with low-mass, thin-walled blanks and proprietary ARC reinforcement to create rods that have stiffness with feel, and stability with sensitivity.
  • Multi Modulus: By varying the fiber tensile modulus along the length of the rod, we’re able to precisely control the stiffness and recovery speed of our blanks. The result is a rod that loads and unloads more smoothly.
  • Fiberfuse Resin: Our all-new FiberFuse enhanced resin system uses new chemistry to create bonds between each graphite fiber that are over 20% stronger than conventional epoxy resins.
  • Natural Finish: Natural finish blanks aren’t subjected to the rip through the sanding belt, nor are they covered with heavy paint to add pop in your fly shop.
  • Mil-Spec III: Mil-Spec III anodize penetrates the surface of the aluminum, creating the hardest, most durable, and most corrosion-resistant finish available. Mil-Spec III prevents galvanic reactions with dissimilar metals and is resistant to temperatures above 900 degrees Fahrenheit.
  • Titanium: With the highest strength to weight ratio and corrosion resistance of any metal, our titanium guide frames let you worry about the fishing, and not about the salt.
  • Universal Guides: These new, patented, American-made guides from Snake Brand feature radius feet which conform to the blank, have the best corrosion resistance, and even have a self-lubricating finish to shoot line farther.
  • Flex Profile: Fast
  • Recovery Speed: Fastest
  • Price: $895.00

Put in Plain English: 

While the technical science jargon is great for those who really know how rod building works, what most will probably have on their mind is the question of; “How does it fish?”To answer that, we’ll break down all the tech specs above in an amalgamative response to summate: “Pretty damn well”.

casting from the shore

The main thing anglers are going to notice is the rod’s flex profile and recovery speed. It seems the trend of today’s fly rods has been to deliver more fast action rods as opposed to your grandfather’s dry-fly launcher. Don’t get us wrong, having a fast fly rod doesn’t mean you can delicately place a size .20 parachute Adams in front of a rising trout, however, it does lend a hand to those looking to diversify their fly arsenal.

scott fly rod

What some may be wondering is, what do we mean when we’re talking about a “fast rod”? The “action” of a fly rod refers to its rigidity. So, in the case of the Scott Centric, you have a more rigid rod with a little less flex. This is great for commanding larger flies off the cast, as well as casting in less than optimal conditions. The standard fly-rod of 10 years ago was a more medium, to slow action rod. These offered a little more casting forgiveness when it came to anglers with less than tuned senses of rhythm, however, also prolonged fish fight time, and (to the less experienced angler), could hinder their ability to consistently toss big streamers. The Scott Centric is built in a way that you’re still able to get that long, light tackle casts off, but in a more efficient manner. On top of that, you’re going to have a much easier time fighting that big fish.

bringing in the fish

Our experience with the Scott Centric

Enjoying the Local Scenery:

Speaking of big fish, we had no problem getting out and taking this rod for a ride. Just in time for the pre-spawn season for big browns, we had a chance to float some of our local waters to satisfy our streamer fix. Equipped with the Centric 6 weight and some of Airflo’s new Power Taper lines, we had no trouble hurling dungeons into the mouths of some mean and hungry fish. We were extremely satisfied with the rod’s ability to accurately huck our large articulated flies exactly where we wanted them with minimal efforts from the anglers. With only 1 or two false casts, we were able to slam undercut banks and tail-outs with ease, all while rolling down the river in a loaded drift boat.

brown trout streamer

While we could spend days on end running the same stretch and catching whole families of fish, this local jaunt was nearly a warm-up for what was to come the following week. After getting home, we rinsed the boat, tubed our rod, and packed our bags for the great North.

Fishing the Centric in Alaska:

After 3 Covid tests, 2 puddle jumper flights, and a boat ride that’ll change your perspective on the world – we were dumped off on the docks of Iliamna River Lodge, located in Pedro Bay, Alaska. The sights were breathtaking, the smells were… somewhat vomit-inducing (considering 3 months of deceased spawning sockeye were not piling up on the shores), but most importantly: the fishing was ON.

scott centric
Guides, Bryson and Happy of Iliamna River Lodge, patrolling the shore

On our first day, we headed upriver to target some of the area’s world-famous rainbow trout. This was sure to be the true test of the Centric’s abilities, as these hard-fighting fish were known to closer resemble escape artists rather than trout. Sure enough, it wasn’t long before a delicious egg was too much for an eager Alaskan Rainbow to resist, and we were hooked up for a good fight.

it takes wrok to land big fish

The entirety of the day progressed as such, with some “win some’s and lose some” moments. However, the highlight was getting over to a conglomerate of feasting Char, bedded underneath a school of Sockeyes. When it comes to fighting freshwater wish, there are few that fight like Arctic Char. Imagine setting the hook, only to find out you’ve got an Akula class WWII submarine on the other end of your line. These fish are heavy, they’re determined, and unfortunately – they’re smart. Having the strength of the Scott Centric was a clear factor in being able to heave some of these beasts to shore.

big char
Photo by GoodwaterFlyFishing

The rest of the week was met with more of the same. Hard fighting fish who wanted nothing more than to embarrass the angler in front of the camera, and good times had by all. Eggs were eventually subbed for streamers, and the team was able to wrangle some pretty impressive ‘bows from a raft headed down crystal clear waters.

rainbow trout in the net

While there’s no substitute for a dialed guide and the proper flies, we have to contribute a portion of our success to the rod that performed in rain, wind, and… more rain. Upon conclusion of this trip, we had all the proof necessary in labeling the Centric a technological masterpiece when it came to fly rods. The engineering and labor put into each aspect of the rod clearly showed out on the water, and we were grateful to have such a weapon in our arsenal.

big rainbow

A Quick Chat With Scott Fly Rods CEO, Jim Bartschi:

After returning back to the lower 48, we had some time to talk shop with Scott CEO, Jim Bartschi, to get some insight surrounding the Centric and what this rod means to him. 

FL: Can you tell us what goes into making a Scott fly rod? The inspiration behind the rod? The testing? What makes a Scott a Scott?

Jim: The first question is, why? If we can’t answer that honestly, there’s no reason to move forward. Once we have that settled, it’s time to start solving the puzzle of taper, material, and lay-up choices. When we have prototypes that we feel are closing in on our goal, they go out into the hands of our Pro Staff and specialty fly shop partners who focus on the techniques and fisheries we’re targeting.

tying the rod

FL: What is it about being manufactured in the States that makes a difference in the rod-making process?

Jim: For us, it’s about control of the process from raw materials to finished rods. We like getting our hands dirty and we like to know exactly how and when each rod was made.

FL: How has being stationed specifically in Colorado affected the production behind Scott’s products?

Jim: It means we come in very early and leave while there’s enough daylight to get some afternoon fishing in. Colorado is home to a community that values the outdoors, fishing, hunting, friends, and family. Working together to craft great fly rods creates a special bond in our shop.

crafting rods

FL: When was the decision made to keep Scott in the US as opposed to sending manufacturing over to a cheaper location?

Jim: It’s very intentional. Making fly rods is a tight-margin business. It just meant that if we wanted to continue building our rods from start to finish, we had to get really good at managing the business.

scott fly rod

FL: What can someone expect when using the new Centric? What changes have been made to updated the rod technology to be best suited to the modern angler?

Jim: The attribute most people cite is, easy. Little effort is needed to produce desired results.

connor casting

Thanks to Jim and all the great folks over at Scott for helping us get a rod in hand so we can get it on the water. If it’s not apparent, we’re very excited about this rod and the standard it’s setting for the entire fly fishing industry. To learn more, or see how you can get your hands on a Centric yourself, Click HERE.

Scott Fly Rods Releases New Flagship Trout Rod: The CENTRIC

A Dream We Call Alaska

 

2021 F3T Behind the Lens: Denny’s Fly Box

In our most recent installment of F3T Behind the Lens, we had the opportunity to sit down and speak with Peter Devlin, the filmmaker behind “Denny’s Fly Box.” Peter’s film tells the tale of Denny Waln, a 78-year-old Missoula local whose passion for fly fishing continues to grow despite the several health conditions he is faced with. Check out the full interview with PMD Productions, Peter Devlin below!

Denny Waln of Denny's Fly Box

Flylords: How Did the Idea for the Film Come About?

Peter: Denny and I worked at a fly shop (The Grizzly Hackle) together once upon a time, maybe 12 years ago.  Once he warmed up to me (which took a while) he would bring me hand-tied flies in his recycled pill containers.  His patterns were stunning and I wanted to find a way to preserve his legacy.  The seed of the idea for “Denny’s Fly Box” was planted.

Headshot of Denny Waln

Flylords: What Inspired You to Make the Film?

Peter: Denny did.  He is a wealth of knowledge and has overcome so much in his life.  But he is as humble and understated as they come.  Cut from a different cloth.  Our generation likes to poke fun at “Boomers” but they have some core values that more people ought to aspire to in my opinion.  I knew that he didn’t possess the motivation for self-promotion and that if someone didn’t tell his story it would run the risk of existing in total obscurity.

Brown Trout in Denny's Fly BoxFlylords: What Were Some of the Struggles that You Faced During the Filming Process?

Peter: Covid is a big one for sure. Denny’s long-time fishing buddy, Erin, was traveling from Boise, ID and our biggest concern was keeping Denny safe. We had to move our filming dates because her family got a cold and we wanted to be super cautious. We all drove separate vehicles during production and masked up when indoors. Other than that, the fish didn’t always cooperate, as can be the case late in the season when we were filming.

Denny Waln's Tying RoomFlylords: What Was the Overall Message You Sought to Portray With This Film? 

Peter: Denny is an inspiration. His message is that no matter what, move forward.  As long as you are above ground, live your life to the fullest and nothing should be taken for granted. It is not a new concept, but one that we humans seem to need constant reminding of, as we get bogged down with all of the baggage of modern existence.  Work, health, our phones, the news—just go fish.

Denny and Erin Fishing in MissoulaFlylords: What Was Denny’s Initial Reaction When you Told Him About the Film?

Peter: All he cared about was that it somehow helped me out. He is so altruistic and generous. He didn’t think anyone would care about his story but I think it is quite the opposite. This film came together more easily and more quickly than any other project I have been a part of.

Shooting Denny's Fly Box in Missoula MontanaFlylords: Where Was the Film Shot, and What Camera Gear Was Used?

Peter: In and around Missoula, MT (the finest fishing in the west IMO). Most of the film was shot with my super light run and gun mirrorless setup: Sony a7riii w/ Sigma art 35 mm/ 1.4 lens and a Ronin gimbal.

Denny and his famous Skwala FlyFlylords: What’s Next for PMD Productions? Anything Exciting on the Horizon?

Peter:  We actually have a big bonefish project in the works!  Bit of a change of pace for me, and a chance to focus on the visuals and the epic fishing shots we all love, but I am always most concerned with a compelling story.

A big thank you to Peter Devlin for taking the time to speak with us about his incredible project! Be sure to keep an eye out for more of his work with PMD Productions!

2021 F3T Behind the Lens: A Journey Upstream

2021 F3T Behind the Lens: Dropped in the Pacific

 

2021 F3T Behind the Lens: River Tigers

Video of the Week: Vision Fly fishing and the February Red Stonefly Hatch

In this weeks’ video of the week, we join the Vision Fly fishing crew in central Finland targeting Brown Trout on the year’s first stonefly hatch. After a long winter, Antti Guttorm and Tuomas Rytkonen are able to share some epic fish and even better comradery as their season begins. The red stoneflies or sumari in Finnish are unique stoneflies that tend to imitate our version of Skwalas. They are the first stoneflies to hatch in Central Finland and the local wild brown trout gorge on them. So enjoy as the Vision team takes advantage of the “warm” spring weather and enjoys “Another Hard Day at the Office”.

Vision Fly Fishing is a Finnish fly fishing brand established in 1997. They do it all, from boots & waders to rods & fly lines. Check out their website here: Visonflyfishing.com for more info and to learn more about Finnish fly fishing.

Check out these other rad articles as well!

Video of the Week: “The Expedition Leader” a Rolf Nylinder Short Film

Faces of Fly Fishing – Jasper Pääkkönen

Video of the Week: IQALUK – A Hooke Film